Models
>
5005
5005
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 5005
Click on the best match to narrow your results.
Exact Part matches for your search term
Viewing 6 of 6
Special Order
Special Order
Keep searches simple, eg. "belt" or "pump".
Carbon brushes are needed to conduct electricity to the armature through the commutator. The brushes are continuously rubbing against the rotating commutator, so will wear down over time, and will nee...
In Stock
Order now and your part arrives by Apr 25
$35.26
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...
In Stock
Order now and your part arrives by Apr 25
$6.51
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the ...
In Stock
Order now and your part arrives by Apr 25
$26.20
Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating par...
In Stock
Order now and your part arrives by Apr 25
In Stock
Order now and your part arrives by Apr 25
$6.51
This is a Genuine OEM replacement part designed for use with Makita Power Tools. It is Sold Individually. This metal Pan-Head Phillips Screw includes a washer. It is used in a variety of applications based on your tool.
In Stock
Order now and your part arrives by Apr 25
$6.51
Manufacturer sourced replacement part designed for use on Makita power tools. The purpose of the brush cap is to hold the brush in the tool. This cap has external threads that thread into the housing ...
In Stock
Order now and your part arrives by Apr 25
$6.51
This pan head screw is a genuine replacement hardware sourced directly from original equipment manufacturer. It is specially produced for use with a variety of power tools. Please make sure to check a...
In Stock
Order now and your part arrives by Apr 25
$31.31
This Ball Bearing is sealed on both sides. This is a genuine Makita replacement part that is sold individually. • Ball bearings minimize friction between 2 parts in your tool that would otherwise...
In Stock
Order now and your part arrives by Apr 25
$6.51
This is a genuine replacement part designed for use with Makita power tools. This o-ring provides an air-tight seal for the connected parts. Please make sure to check appropriate diagrams for location...
In Stock
Order now and your part arrives by Apr 25
$6.51
This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with circular saws, table saws, masonry saws, planers, demolition hammers, and angle cutter...
In Stock
Order now and your part arrives by Apr 25
$6.51
This part is available individually. The spring washer fits between the wing nut and the flat washer. This washer is small and will need to be replaced if it gets lost or if it breaks. It is made out ...
In Stock
Order now and your part arrives by Apr 25
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bruce from HILLSBORO, OR
- Parts Used:
- 664064-4
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Was this instruction helpful to you?
Thank you for voting!