Models
>
3709
3709
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 3709
Click on the best match to narrow your results.
- 3709 (D12) Braun Toothbrush (Vitality Tooth Brush)
- 3709 (D12.5) Braun Toothbrush (Vitality Tooth Brush)
- 3709 Makita Laminate Trimmer (Tilt Base 1/4" Laminate Trimmer with L.E.D. Light)
- 3709205B MTD Lawn Mower (Gas Walk-Behind Mower)
- 3709304 MTD Lawn Mower (Gas Walk-Behind Mower)
- 3709403 MTD Lawn Mower (Gas Walk-Behind Mower)
- 3709502 MTD Lawn Mower (Gas Walk-Behind Mower)
- 3709601 MTD Lawn Mower (Gas Walk-Behind Mower)
- 3709700 MTD Lawn Mower (Gas Walk-Behind Mower)
Exact Part matches for your search term
Viewing 4 of 4
Special Order
Special Order
Keep searches simple, eg. "belt" or "pump".
$35.26
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...
In Stock
Order now and your part arrives by Apr 10
$19.19
This part includes two carbon brushes with wire leads and brush springs. Worn brushes are typically presented as a failed or underperforming motor. Carbon brushes are a part that commonly wears, so it...
In Stock
Order now and your part arrives by Apr 10
$6.51
This is a M4 X 10 countersunk screw, and it is sold individually. This screw is compatible with various models, so its location may differ depending on your equipment. To fasten and unfasten this scre...
In Stock
Order now and your part arrives by Apr 10
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
In Stock
Order now and your part arrives by Apr 10
$6.51
This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...
In Stock
Order now and your part arrives by Apr 10
$32.03
This Ball Bearing is sealed on both sides. This is a genuine Makita replacement part that is sold individually. • Ball bearings minimize friction between 2 parts in your tool that would otherwis...
In Stock
Order now and your part arrives by Apr 10
$6.51
This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and p...
In Stock
Order now and your part arrives by Apr 10
$6.51
This replacement adjustment knob/screw is a genuine Makita part. It is supplied from original equipment manufacturer for use with belt sanders/trimmers. While the belt is running, use the adjusting kn...
In Stock
Order now and your part arrives by Apr 10
$6.51
This brush cap is a genuine OEM sourced replacement part. It is commonly used on a variety of Makita power tools. This brush cap helps to secure the carbon brush in the brush holder. This cap has exte...
In Stock
Order now and your part arrives by Apr 10
In Stock
Order now and your part arrives by Apr 10
$49.15
This is the lower handle for various models of walk-behind lawn mowers. This handle is made of durable black metal and attaches directly to the rear of the lawn mower. This handle is an OEM part that ...
In Stock
Order now and your part arrives by Apr 10
$6.51
This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with circular saws, table saws, masonry saws, planers, demolition hammers, and angle cutter...
In Stock
Order now and your part arrives by Apr 10
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from PITTSBURGH, PA
- Parts Used:
- 731-1029
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from HILLSBORO, OR
- Parts Used:
- 664064-4
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Was this instruction helpful to you?
Thank you for voting!