Models
>
3202S
3202S Snapper Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 3202S
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
$10.50
This knob is used on a variety of lawn and gardening equipment and acts as a nut to fasten bolts and stayed secure in your tool. Replace this part if your bolt is loose and needs security. The diamete...
In Stock
Order now and your part arrives by Mar 20
$7.18
This is an authentic OEM sourced replacement component which is specially made for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make ...
In Stock
Order now and your part arrives by Mar 20
$6.25
It is a standard hardware which may have multiple applications. This is a genuine OEM sourced cotter pin designed for use with Murray, Simplicity, and Snapper lawn tractors. It is an identical replace...
Special Order
$9.75
This is a genuine Snapper replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The plastic retainer is used to fasten the chute to the auger housing asse...
In Stock
Order now and your part arrives by Mar 20
$6.25
The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installati...
In Stock
Order now and your part arrives by Mar 20
$6.25
It is an authentic OEM part which is specially designed for Murray riding lawn mowers and garden tractors. This is one of the push nuts that help to secure the pivot rod. If your hardware is damaged o...
In Stock
Order now and your part arrives by Mar 20
This manufacturer sourced replacement hex lock nut is commonly used with snow blowers and riding lawn mowers. A lock nut is specially designed to resists loosening when it is threaded onto a bolt. Thi...
In Stock
Order now and your part arrives by Mar 20
$6.25
This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering sp...
In Stock
Order now and your part arrives by Mar 20
$6.25
This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment....
In Stock
Order now and your part arrives by Mar 20
$44.39
This item has been sourced from the original manufacturer and is intended to be used with snowthrowers from Snapper. This scraper blade attaches to the bottom of the auger housing. This item is used t...
In Stock
Order now and your part arrives by Mar 20
$6.25
It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches t...
In Stock
Order now and your part arrives by Mar 20
This standard hardware is made for use with a lawn and garden equipment such as snow throwers/blowers and lawn mowers/tractors. This flat head carriage bolt has multiple uses based on your equipment. ...
In Stock
Order now and your part arrives by Mar 20
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old auger broke
From the parts visual
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from ULYSSES, KS
- Parts Used:
- 7028427YP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Installed new scrapper blade
Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from FAIRMONT, WV
- Parts Used:
- 7014915YP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Blower chute kept falling off
Ordered the plastic chute retainer parts. 3 required. Remove screws from chute to retainer 6 total. Replace chute and hold retainer clip under chute and replace screws. Do not over tighten only made of plastic. Make sure to spray some wd 40 on rim so it moves smoothly. If it doesnt loosen screws a little. Works perfect.
Was this instruction helpful to you?
Thank you for voting!