Models
>
1333
1333
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 1333
Click on the best match to narrow your results.
- 1333 (0601333239) Bosch Concrete Saw ((060239) Cut-Off Machine)
- 1333 (0601333260) Bosch Angle Grinder ((060260) Cut-Off Machine)
- 1333 Bissell Hand Vacuum (Hand Vacuum)
- 1333 ( 31AE993I100 2000 ) Cub Cadet Snow Blower (Swe Snow Thrower)
- 1333*0A Roper Range (GAS RANGE)
- 1333*1A Roper Range (GAS RANGE)
- 1333^0A Whirlpool Range
- 1333^1A Whirlpool Range
- 13330-1 General Electric Range
- 13330-4 General Electric Range
- 13331 (0601333139) Bosch Angle Grinder (Angle Grinder)
- 13332 (0601333260) Bosch Angle Grinder (Angle Grinder)
- 13332 (0601333239) Bosch Angle Grinder (Angle Grinder)
- 13338-1 General Electric Range
- 13338-4 General Electric Range
- 1333E (1998) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 1333E/1998 Parts)
- 1333SE (1999) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 1333SE/1999 Parts)
- 1333SWE (2000) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 1333SWE/2000 Parts)
- 1333SWE ( 31AE993I100 2001 ) Cub Cadet Engine (Engine)
- 1333W0A Roper Range (Freestanding, Gas)
- 1333W1A Roper Range
Exact Part matches for your search term
Viewing 2 of 2
This part number matches the current model number 1333
No Longer Available
Special Order
Keep searches simple, eg. "belt" or "pump".
This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the b...
In Stock
Order now and your part arrives by Mar 27
$29.87
This is an OEM power cord that is compatible with a variety of power tools. It consists of two prongs and two wires. This 14-gauge power cord measures approximately 6.5-feet long. A functioning power ...
In Stock
Order now and your part arrives by Mar 27
$22.91
This lid or door switch kit helps ensure your washer or dryer only runs when the door is properly closed. It’s a safety feature that prevents spills and keeps your appliance working as it should. The ...
In Stock
Order now and your part arrives by Mar 27
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Mar 27
$6.51
This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventua...
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
This 6-inch coil surface element is designed to replace a broken burner on compatible electric ranges, restoring direct heat for everyday cooking. With a power output of 1250 watts, it efficiently hea...
In Stock
Order now and your part arrives by Mar 27
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Mar 27
$6.69
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Order now and your part arrives by Mar 27
$6.51
The chute flange keeper attaches to the lower chute using the flange lock nut and helps the chute to pivot. This is a genuine replacement part made by Ryobi, MTD, and Yard Machines for use in snow thr...
In Stock
Order now and your part arrives by Mar 27
$6.51
This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard h...
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
Common Problems and Symptoms for 1333
Viewing 5 of 5Element will not heat
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Will not agitate
Fixed by these parts
How to fix it
Won’t Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kenneth from Wilmington, IL
- Parts Used:
- W10820036
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set
Lid closes, switch wouldn't turn on machine.
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams.
... Read more
Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glen from Plano, TX
- Parts Used:
- W10820036
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Washer would fill up, wash, then stop
I deduced the lid switch was the problem.
I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed ... Read more it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.
The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed ... Read more it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.
The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Xiaobin from Cordova, TN
- Parts Used:
- W10820036
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
One day, I found my dryer continued running after I opened the door. And next day, it stopped working at all. I thought it was time to buy a new one, since my dryer had been used for more than 15 years. But I was curious to know what went wrong, and recalled my friend told me he repaired the door
My daughter found the video on youtube, which showed step by step repairing procedures. I just followed it and fixed my dryer in 15 min.
Was this instruction helpful to you?
Thank you for voting!