Models
>
BC280
BC280
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for BC280
Click on the best match to narrow your results.
- BC280 (2014) Cub Cadet Trimmer (Cub Cadet String Trimmer Model BC280/2014 Parts)
- BC280 Poulan Trimmer (Poulan String Trimmer Model BC280 Parts)
- BC280 ( 41ADZ28C912 2015 ) Cub Cadet Trimmer (41ADZ28C912 Gas String Trimmer)
- BC280 RedMax Trimmer (Trimmer)
- BC280 (000001 AND UP) RedMax Edger (Trimmers/Edgers)
- BC280 (2010-02) RedMax Brush Cutter (Brushcutter)
Keep searches simple, eg. "belt" or "pump".
$8.95
This is a single fuel filter found in numerous types of lawn and garden equipment that have small engines. The fuel filter cleans the fuel before making its way to the carburetor, thus preventing buil...
In Stock
Order now and your part arrives by Mar 22
$8.95
By replacing your spark plug as part of your regular maintenance, this ensures a better performing engine, cleaner exhaust, faster starting, and a smooth-running engine. This spark plug is sourced dir...
In Stock
Order now and your part arrives by Mar 22
$49.52
A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, ...
In Stock
Order now and your part arrives by Mar 22
$14.92
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part ...
In Stock
Order now and your part arrives by Mar 22
$7.45
This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unf...
In Stock
Order now and your part arrives by Mar 22
$11.13
This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combust...
In Stock
Order now and your part arrives by Mar 22
$6.25
This is a genuine Husqvarna replacement part, it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal...
In Stock
Order now and your part arrives by Mar 22
$10.46
This part includes one purge bulb, also known as a primer bulb. It is supplied by the manufacturer to be a direct replacement for the original. The purge bulb is pressed, and this removes the air from...
In Stock
Order now and your part arrives by Mar 22
$35.80
Genuine OEM replacement kit used on Gas Trimmers and Tillers. This part includes: Clutch Drum, Clutch, Clutch Washer and the Screw which has a left-handed thread. A centrifugal clutch is a part that u...
In Stock
Order now and your part arrives by Mar 22
$6.25
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carbure...
In Stock
Order now and your part arrives by Mar 22
$6.25
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburet...
In Stock
Order now and your part arrives by Mar 22
$54.34
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines.
Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor.
Work in a...
In Stock
Order now and your part arrives by Mar 22
Common Problems and Symptoms for BC280
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
How to fix it
Engine revs but trimmer head will not turn
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from ENID, OK
- Parts Used:
- 545008082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
Was this instruction helpful to you?
Thank you for voting!
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines o
... Read more
nto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from SALEM, OH
- Parts Used:
- 530069599
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Broken fuel line
Removed broken fuel line from gas tank. Threaded new line into tank routed it to the carb and cut to length needed. Attached to the carb.
Was this instruction helpful to you?
Thank you for voting!