Models
>
2704
2704
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 2704
Click on the best match to narrow your results.
- 2704 Makita Table Saw (Table Saw)
- 2704 (Type 2) Makita Saw (Saw)
- 2704-20 Milwaukee Hammer Drill (M18 Fuel Hammer-Drill)
- 2704-20 (G73A) Milwaukee Hammer Drill (Milwaukee 2704-20-(G73a) Parts)
- 2704-22 (G73A) Milwaukee Hammer Drill (Milwaukee 2704-22-(G73a) Parts)
- 270450 (1999&Before) Husqvarna Lawn Tractor (Tractor)
- 270450 Poulan Lawn Tractor (Lawn Tractor)
- 270451 Poulan Lawn Tractor (Tractor)
- 270451 (1999 & Before) Husqvarna Lawn Tractor (Tractor)
- 270451 Husqvarna Lawn Mower (Husqvarna Lawn Mower Model 270451 Parts)
- 2704X1 Makita Table Saw (10" Table Saw)
Exact Part matches for your search term
Viewing 5 of 5
Special Order
Special Order
Keep searches simple, eg. "belt" or "pump".
$6.51
This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missi...
In Stock
Order now and your part arrives by Mar 27
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually...
In Stock
Order now and your part arrives by Mar 27
$6.51
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part...
In Stock
Order now and your part arrives by Mar 27
This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is ...
In Stock
Order now and your part arrives by Mar 27
$6.51
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to ...
In Stock
Order now and your part arrives by Mar 27
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most mod...
In Stock
Order now and your part arrives by Mar 27
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are ...
In Stock
Order now and your part arrives by Mar 27
$6.51
This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-82-5275 Screw is to secure the Belt Clip or the Bit Clip on the models shown below. This screw requires a...
In Stock
Order now and your part arrives by Mar 27
$18.66
This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of t...
In Stock
Order now and your part arrives by Mar 27
$6.51
This is an authentic OEM bearing for lawn tractors and lawn mowers. Bearings provide a cushion for moving components, so they do not damage due to the constant rubbing against each other. They also he...
In Stock
Order now and your part arrives by Mar 27
$6.51
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
In Stock
Order now and your part arrives by Mar 27
$6.51
This is a genuine Craftsman replacement part for use in lawn tractors. It helps to connect the deflector rod to the deflector shield. The metal push nut is a small part and will need to be replaced if...
In Stock
Order now and your part arrives by Mar 27
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from PILESGROVE, NJ
- Parts Used:
- 532123583
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from BINGHAMTON, NY
- Parts Used:
- 532121749
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Was this instruction helpful to you?
Thank you for voting!