Black and Decker/Black and Decker_Thumb/BDL18_Type_1_WW_1.gif.gif
See part 1 in the diagram
( Grid squares measure 1x1 inch )

Krypton Bulb

$ 4.64   Special Order
Fix Number: FIX10174896
Manufacturer #: 498797-06
Manufactured by: DeWALT

Product Description

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      barry from CHARLESTON, WV
    • Parts Used:
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    Replace bulb in B&D 18v rechargable flashlight
    Back of flashlight has a slotted insert, which is actually the bulb socket. With a screwdriver give the insert a half turn. This will allow the bulb socket with bulb to just fall out. Free the bulb from the socket by gently pushing in and twisting.
    Put the new bulb in the socket, gently push and twist until bulb is securely in the socket. Replace the socket & bulb back into the flashlight the same way it was removed. The socket fits in its hole by lining up tabs on the socket with slots in the hole. After insertion use screwdriver to give it a half turn to secure it in the flashlight. Done.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX10174896
      Manufacturer Part Number: 498797-06
      Model Number
      Black and Decker
      Worklight & Flashlight - 18 Volt Light
      Black and Decker
      Worklight & Flashlight - Lighting
      Black and Decker
      Worklight & Flashlight - 18 Volt Firestorm Light