Commonly referred to as dog ears, these agitator directional cogs are manufacturer approved replacement parts that come in a package of 4 and are usually used with direct drive washing machines. We recommend replacing all 4 directional cogs at the same time. The agitator directional cogs reach across the gear teeth in one direction and dig into the gear teeth in the other direction to create the needed agitation. This thrusting motion is what tumbles your clothes during the wash cycle. When the teeth on the outer edge are damaged, the cogs will not engage with the upper agitator, making it impossible to agitate as it should. If your machine makes unusual noises, shakes/moves while operating, or will not spin or drain properly, it may be time to replace them. To access this part, simply remove the softener dispenser and then the agitator cap. You will find them attached to the agitator. Each cog is approximately 1 inch long and made of a durable plastic.
Works with the following brands:
Whirlpool, Kenmore, KitchenAid, Roper
Works with the following products:
Washer, Washer Dryer Combo
Fixes the following symptoms:
Will not agitate, Spins slowly, Spinning Issues, Marks left on clothes
Part# 80040 replaces these:
AP3119063, 3109, 80040, 285612, 285770, 3366877
...
Show more, 387091, 80040, 80040VP, 99989668 Show less
Works with the following brands:
Whirlpool, Kenmore, KitchenAid, Roper
Works with the following products
Washer, Washer Dryer Combo
Fixes the following symptoms
Will not agitate, Spins slowly, Spinning Issues, Marks left on clothes
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
October 26, 2023
My Kenmore washer has spinning issues. Works sometimes. Other times it needs help to get going(turn by hand). The coupler appears to be in good shape.
But I noticed that the 'cogs' section of the agitator, the slots, were empty. None.
Any clues here for yiou?
Most appreciative.
For model number 11024862300
Hello Wayne, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the drive motor, part number FIX11746108, to fix the issue. We have researched and found that your model come with the agitator dogs. The compatible agitator dogs for your model are part number FIX388034. We hope this solves your problem!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Followed the simple instructions on youtube, searching for "kenmore upper agitator doesn't work." There are a number of videos there. Find the notch on agitator cover and pry off the cover using a flat screw driver. Remove the nut in the center of the agitator using the 7/16 socket with extension. Remove upper agitator (mine came off easi
... Read morely but some may require removing the entire agitator, then pulling off the upper agitator). Remove assembly from inside and replace the dogs. Reassemble.
Cogs were worn down, thus the top of the agitator would not move
Removed fabric softener cover, inner cover and removed screw and washer. Replaced cogs, changed the inner seal ring and changed out screw and washer. Put it all back together and done. This is the 2nd time I've had to replace cogs since I've had the washer.
Remove cap. Use socket to remove retaining bolt. Remove cogs holder. Use screw driver to remove retaining ring. Replace cogs. Reverse for installation.
Follow the videos and it's easy to do the repair. Spent more time cleaning the appliance than it took to do the repair, (shredded rubber from large washer part of the motor coupling and many years of dust). My only suggestion would be to turn down the front legs (feet) so it's easier to get the cabinet body under the front steel spreader
... Read morepiece of the cabinet frame. Also, breaking off the plastic tabs under the thrust spacer, as suggested in video, will prevent them from getting in the way when you reassemble the parts. First attempt one folded under the thrust spacer and prevented it from seating properly. A socket extension is a must to remove/install agitator bolt.
Agitator would not move & During spin cycle tub would not spin sounded like shaking a can with marbles in it
I looked at the pictures on the order form and thought I could guess what was damaged then I saw the trouble shooting section and it said that it could be two parts, I saw the price and ordered both. I watched the video on how to replace the parts I purchased, it only took me 30 minutes to replace both. My wife was so impressed she clea
... Read morened up after me and after I did a trial run and gave the OK she started washing my clothes. Thanks for making the video. Jay
Took detergent dispenser off..removed bolt and replaced parts..put back together
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(20 Reviews)
4.8
★★★★★
★★★★★
Filter By Rating:
5★
16
4★
3
3★
1
2★
0
1★
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kenney W - April 25, 2024
Verified Purchase
Worked great
It fixed the problem works now.
★★★★★
★★★★★
Augie F - July 8, 2023
Verified Purchase
Works great!
The parts came on time and replacement was easy! Tested with a full wash load and so far, so good!!
★★★★★
★★★★★
Jason C - March 13, 2023
Verified Purchase
Fixing my washer
Parts were ordered one day and then they were delivered 2 days later. Very happy with my order..
★★★★★
★★★★★
Marsha S - October 30, 2021
Verified Purchase
Agitation cogs
Perfect replacement. Easy to install and saved lots of $$.
★★★★★
★★★★★
Joan T - October 27, 2021
Verified Purchase
Worked well
Easy to replace
★★★★★
★★★★★
George R - October 26, 2021
Verified Purchase
Agitator cogs
Replaced worn cogs with new cogs,works great.
★★★★★
★★★★★
Eliazar Méndez F - October 26, 2021
Verified Purchase
Excelent item
My washer start to work like new and more power thanks! Fix.com
★★★★★
★★★★★
Ricky S - September 14, 2021
Verified Purchase
Perfect fit
Exactly what I was hoping for, perfect fit and now agitates again. Less than 5 minutes to install. Not happy with delivery time frame. Took two weeks and no way to track it. When you pay nearly 7 bucks for shipping on a nearly 5 dollar part I would hope for delivery in one week.
★★★★★
★★★★★
Froilan A - September 1, 2021
Verified Purchase
Washer Agitator replacement parts
High quality oem replacement parts, highly recommended seller!!!
★★★★★
★★★★★
Cheryl H - August 30, 2021
Verified Purchase
Worked great!
Was the part we needed and it fixed the washer,thank you!
< Prev
1
2
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX388034
Manufacturer Part Number: 80040
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.