Agitator Directional Cogs

Commonly referred to as dog ears, these agitator directional cogs are manufacturer approved replacement parts that come in a package of 4 and are usually used with direct drive washing machines. We recommend replacing all 4 directional cogs at the same time. The agitator directional cogs reach across the gear teeth in one direction and dig into the gear teeth in the other direction to create the needed agitation. This thrusting motion is what tumbles your clothes during the wash cycle. When the teeth on the outer edge are damaged, the cogs will not engage with the upper agitator, making it impossible to agitate as it should. If your machine makes unusual noises, shakes/moves while operating, or will not spin or drain properly, it may be time to replace them. To access this part, simply remove the softener dispenser and then the agitator cap. You will find them attached to the agitator. Each cog is approximately 1 inch long and made of a durable plastic.

• Works with the following brands:
  Whirlpool, Kenmore, KitchenAid, Roper
• Works with the following products:
  Washer, Washer Dryer Combo
• Fixes the following symptoms:
  Will not agitate, Spins slowly, Marks left on clothes, Will not drain
• Part# 80040 replaces these:
  AP3119063, 3109, 80040, 285612, 285770, 3366877 ... Show more , 387091, 80040, 80040VP, 99989668 Show less