Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Water Level Pressure Switch
$134.02
In Stock
- Fix Number:
- FIX3408149
- Manufacturer #:
- W10339251
- Manufactured by:
- Whirlpool
- Product Description
- This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
- Works with the following brands:
- Whirlpool, Maytag, Kenmore, Estate
- Works with the following products
- Washer
- Part# W10339251 replaces these:
- AP4568155, 1617124, 8577844, W10213635, W10339329
Part Number Cross Reference
Product Description
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
-
Works with the following brands:Whirlpool, Maytag, Kenmore, Estate
-
Works with the following products:Washer
-
Part# W10339251 replaces these:AP4568155, 1617124, 8577844, W10213635, W10339329
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cody
August 7, 2022
on some spots on the washer timer it starts filling and keeps draining instead of keeping it and washing. other spots its fine
For model number Amana ntw4500VQ1
Hi Cody,
Thank you for your question. If your washer is filling and draining at the same time, make sure that the drain hose is not shoved too far down in the standpipe. If it is, a vacuum will form that will cause the water to drain as the washer is filling with water. Raise the hose a few inches out from the standpipe and this should resolve the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Nancy E. from Ocala, FL
- Parts Used:
- W10339251
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken Water Level Pressure Switch
Took the top panel off and replaced the switch. A plastic clear hose came with the kit, the whole back panel would need to come off. I didn't replace the hose. The switch was pretty easy and it went smoothly.
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3408149
Manufacturer Part Number: W10339251
Manufacturer Part Number: W10339251
Brand
Model Number
Description
✖
Mail-In Recycling Rebate