Clutch Assembly
Works With Model ATW4470TQ0!
$50.03
In Stock
Fix Number: FIX334641
Manufacturer #: 285785
Manufactured by:
Whirlpool
Works With Model ATW4470TQ0!
-
Product Description
This is a genuine OEM replacement clutch assembly for your washing machine. A clutch assembly, also known as a clutch or a washer clutch, is responsible for spinning the tub during the spin cycle. If the clutch becomes worn and is no longer operating properly, your clothes will remain soaked after the cycle is finished. Some other signs it is time to replace the clutch is if your washer is noisy while running, there is a burning smell, or the machine is shaking excessively. This kit comes with the clutch, brake cam driver, spring, retaining ring, and a nylon anti-rattle clip. Before beginning this repair, be sure to disconnect the power and water supply to your machine. Depending on your washer model, you may need an additional person to help lower the machine onto its back, as access to the drive shaft to change the clutch assembly may be easiest through the bottom of the appliance.
-
Works with the following brandsWhirlpool, Kenmore, KitchenAid, Roper
-
Works with the following productsWasher, Washer Dryer Combo
-
Fixes the following symptomsSpins slowly, Will not agitate, Burning smell, Will not drain
-
Part Number Cross ReferencePart# 285785 replaces these:AP3094537, 2670, 285785, 285331, 285380, 285422, 285540, 285761, 285785, 285785VP, 3350015, 3350114, 3350115, 3351342, 3351343, 387888, 388948, 388949, 3946794, 3946847 ... Show more , 3951311, 3951312, 62699, 63174, 63765, 64176 Show less
Product Description
This is a genuine OEM replacement clutch assembly for your washing machine. A clutch assembly, also known as a clutch or a washer clutch, is responsible for spinning the tub during the spin cycle. If the clutch becomes worn and is no longer operating properly, your clothes will remain soaked after the cycle is finished. Some other signs it is time to replace the clutch is if your washer is noisy while running, there is a burning smell, or the machine is shaking excessively. This kit comes with the clutch, brake cam driver, spring, retaining ring, and a nylon anti-rattle clip. Before beginning this repair, be sure to disconnect the power and water supply to your machine. Depending on your washer model, you may need an additional person to help lower the machine onto its back, as access to the drive shaft to change the clutch assembly may be easiest through the bottom of the appliance.
-
Works with the following brands:Whirlpool, Kenmore, KitchenAid, Roper
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Spins slowly, Will not agitate, Burning smell, Will not drain
-
Part# 285785 replaces these:AP3094537, 2670, 285785, 285331, 285380, 285422 ... Show more , 285540, 285761, 285785, 285785VP, 3350015, 3350114, 3350115, 3351342, 3351343, 387888, 388948, 388949, 3946794, 3946847, 3951311, 3951312, 62699, 63174, 63765, 64176 Show less
Videos For installing this part.
Replacing your Clutch Assembly
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Paul from Mobile, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
would not spin
well i replaced a lot of parts..but i think it was the the lid switch. but now its brand new..Thanks
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Glenn from Lancaster, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Would not spin but did pump water
Repair time of the problem was easier than moving the washer out of a very tight laundry area. The repair was much easier than I anticipated. The parts fit perfectly , And it was successful.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Nicholas from Covington, WA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
The drum would not spin
I decided to attempt to replace both the clutch and the drive coupling. I had to take apart the couple to do the clutch anyway. Unfortunately I was unable to remove the couple plastic/fiberglass pieces so I only replaced the rubber coupler. The transmission; however, was covered in clutch dust. I put the new one in, put it back together and notice my clear plastic drum was disgusting, so I tore it apart somewhat to clean it. Then put it all back together and it works like a champ. Awesome videos for instruction. Next time something fails I am shopping here first.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:James from Teaticket, MA
-
Parts Used:285785
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
The washing machine would not operate in the spin cycle, leaving the clothes soaking wet.
The first repair I did was to replace the direct coupling.Although the coupling was worn, it did not fix the problem. So the next repair I did was to replace the clutch. i watched the video on the repair and decided to not remove the cabinet. I removed the hoses and unplugged the washer. I laid the washer on its side and removed the 2 clips holding the water pump. I pushed the water pump aside, and removed the 3 bolts holding the transmission. The motor and transmission can now be removed as a unit.I followed the video instructions and replaced the clutch.The repair worked and the washer now spins the water out of the clothes. I am very pleased with the videos and quality parts and fast shipping from this site.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Sam from SCHROON LAKE, NY
-
Parts Used:285785
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
my washer failed to spin adequately
Followed instructions provided in video. All went well. The hardest part was getting the washer "shell" back on its frame. Fortunately I had all the right words in my swearing toolkit! THANK YOU for this resource (thumbs up)
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Jeff from Columbia, MO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set
The machine would jerk violently
with a very loud clank, every time the spin cycle stopped. From what I read, it was probably the brakes but decided to do the clutch while I was there. I found web site and watched their great video on clutch replacement. I've never worked on a washing machine before but doing the clutch alone would have been what I call a "easy" job. With the clutch out, you're staring right at the brake assembly. They're removed easily enough but are kind of pain to install without the right tool. I struggled for over an hour trying to get the second shoe mounted with the spring loaded between them. I ended up compressing the spring with channel lock pliars while putting a large center punch through the mounting hole in the shoe and into the indentation in the center of the mounting post. Pressing in hard and using it as a lever, I was able to pull the shoe over and onto the post. An installation tool could be easily made from a 6" piece of 1/4" or 3/8" rod, bent 90 degrees, with a point coming off one side of one of the ends. With the point inserted into the mounting post's indentation, like the center punch, the rod would only have to be rotated in order to bring the brake shoe into alignment with the post. I feel confident I could do a repeat repair in less than 2 hours even without an installation tool.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Ronald from Hoquiam, WA
-
Parts Used:285785
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
would not spin every time---didn't matter which spin setting
replaced the clutch assembly using the online videos available---found it to be an easy straight forward fix
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Scott Olsen / Solsun from Manti, UT
-
Parts Used:285785
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
Slow tub spin cycle with clothes still dripping wet.
The video and other posts on this repair were GREAT! I did not remove the housing just drained the lines and laid it on its back and did the rest as described in the posts and in the video, just could not see quite as much when removing the staps from the pump and motor. Went very well about 45 min. from disconnecting the hoses and removing the washer from the closet, to doing the repair and back in the closet hooked up and ready to go. Have a couple old rags on hand to wipe things and your hands, mine was not as clean as the washer in the video.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Mark from OWASSO, OK
-
Parts Used:285785
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
Very slow spin. Clutch was worn out.
I followed the UTube repair to the T except the first step was not simple. The bolt head inside the agitator was completely corroded. I drilled the head off removing chips with a magnet until the hole was deep enough to break the head off with a pin punch. After removing the transmission, I was gratified that the bolt protruded about 1/2", very easy to remove with vice grips. Using a little liquid wrench the bolt was easily removed. The local hardware was out of fine thread 5/16" bolts so it took some looking to find one. Other than that, it was just as easy as the UTube video.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Sharon from Marshall, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Socket set
machine would not spin sometimes and when it did it was slow
We watched a video showing what to do and it was no problem at all. It was also very helpful with website asking what the problem was so we would order the right parts. Very satisfied customer!
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX334641
Manufacturer Part Number: 285785
Manufacturer Part Number: 285785
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts