This tub spring is a genuine OEM replacement part for your washing machine and is sold individually. There are other names that the tub spring goes by, such as the suspension spring, balance spring, or counterweight spring. The purpose of this spring is to ensure that the tub sits straight during the spin cycle, and it does this by counterbalancing the weight of the motor. If the spring has broken, it will cause the tub to be off-balance, which can make the washer shake and become noisy when spinning. An off-balance tub can also cause damage to other components of your washer, so it should be fixed quickly. If your model of washing machine has more than one tub spring, they should all be replaced at the same time as they tend to wear evenly. The tools you will need to complete this repair are a pair of pliers, a Philips screwdriver, and a flat blade screwdriver. Please be sure to disconnect the power supply to your washer before beginning this repair.
Works with the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag
Works with the following products:
Washer, Washer Dryer Combo
Fixes the following symptoms:
Shaking and Moving, Leaking, Spinning Issues
Part# WPW10250667 replaces these:
AP6017818, 338492, 388492, 62738, 63207, W10250667
...
Show more, WPW10250667VP Show less
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
April 30, 2022
Sn: 012kwsb02302 My washer works fine. But we fine it’s not spinning the water out of all clothes. Especially towels!! Could it be something slipping?? And it’s over 13 years old . Thanks for your help
For model number Wm2350hrc
Hello Fred, Thank you for your inquiry. Usually this is caused by the washer not spinning fast enough to spin all of the water out of the clothes or not draining properly. We would recommend checking the tub bearing, the stator, the rotor assembly, the motor rotor position sensor, and the drain pump. Check the bearing for any visible damage, and you can test the other parts with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This suspension spring is a genuine OEM replacement part for a variety of washers and washer-dryer combos. The primary purpose of the suspension spring is to support the outer tub and keep the tub steady during loads tha...
This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
just to understand the type and different model videos
exactly as the video mentioned, just need to explain if some models are alike or different using the same part numbers will be awesome.in my case my washer had the screws in different areas to disassemble and Assembly the spare parts, other than that beautiful idea in sending the link video with the email confirmation let me tell you fir
... Read morest class and top of the line customer service rated 5 Stars
washer would walk and violently shake on spin cycle
On the bottom of the control panel there are two Phillips head screws you have to take out. Flip up the control panel and it will rest on its own hardware. Next pop off both golden locking tabs that are now exposed from underneath the control panel. Now the whole porcelain body will slide off forward. Use pliers to take off and replace th
... Read moree 4 Springs. Assembly is the reverse.
washer would shake and dance all over the floor during spin cycle even if load was balanced out.
To make a long story short, I watched the video on this parts website and followed their instructions. Worked perfectly. It came apart, parts replaced and assembled just as video stated. Simple repair. Thanks so much for the video help and will always come to this site for help and parts. Can't beat the delivery time also, ordered on sund
... Read moreay and parts were here on tuesday.
Pump leaked and needed replaced. Also replaced a rusted spring-unrelated to the pump.
Removed washer shell. Propped washer front on 10 in 2x4 stilts. Unclipped the two clamps that hold the pump. Attempted to remove pump. Unsuccessful. Loosened the clamps that hold the motor and removed the motor. Still unable to remove pump from motor because they are rusted together. Happened to have a spare motor. When the new parts cam
... Read moree in the mail, I put the replacement motor in the same way the old one came out. In error, I had purchased only one rubeer grommet, so I reused the four old ones. Clamped tge motor in place, Attached the new pump, Reattached the hoses to the pump, Reconnected the electric to the motor, Took out the stilts, Replaced the shell, Reattached the panel, Plugged it in, And started it up. Ready to do two weeks worth of laundry....
Machine vibrates excessively when in spin cycle either with or without clothes in washer.
I watched the video tip on this site and then preformed my repair. This was a very easy repair and my washing machine no longer vibrates excessively in the spin cycle. I used a 5/16 nut driver to unscrew the fasteners and held the bracket with my hand to ease the tension. Make sure to put the spring on the same way it came off the brac
... Read moreket. Put some grease on the spring tips for lubrication. I had a slight challenge getting the enclosure reinstalled on my machine that took most of the repair time. Thanks for the fast shipping and helpful video on your website. I appreciate saving money and time.
Washer tub was very wobbly, too loose/noisy to use
From the videos on the excellent web site, where instructional videos are available directly on the part-ordering window, I learned how to open up the machine and access the parts that needed to be replaced. I did not take the back off so only changed two of the three suspensions springs plus the tub spring, but the machine now runs fine
... Read more. I had a little trouble getting the cabinet back on properly.
Read less
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11751118
Manufacturer Part Number: WPW10250667
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
