Maytag/Maytag_Thumb/OGHXSQCE.gif
See part 15 in the diagram
Replacing your Whirlpool Washer Tub Spring play video
( Grid squares measure 1x1 inch )

Tub Spring

$6.34
Fix Number: FIX11751118
Manufacturer #: WPW10250667
Manufactured by: Whirlpool

Product Description

This tub spring is a genuine OEM replacement part for your washing machine and is sold individually. There are other names that the tub spring goes by, such as the suspension spring, balance spring, or counterweight spring. The purpose of this spring is to ensure that the tub sits straight during the spin cycle, and it does this by counterbalancing the weight of the motor. If the spring has broken, it will cause the tub to be off-balance, which can make the washer shake and become noisy when spinning. An off-balance tub can also cause damage to other components of your washer, so it should be fixed quickly. If your model of washing machine has more than one tub spring, they should all be replaced at the same time as they tend to wear evenly. The tools you will need to complete this repair are a pair of pliers, a Philips screwdriver, and a flat blade screwdriver. Please be sure to disconnect the power supply to your washer before beginning this repair.

Videos For installing this part.

Replacing your Tub Spring

Replacing your Tub Spring play video
Questions and Answers

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.
    Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Fred
    April 30, 2022
    Sn: 012kwsb02302 My washer works fine. But we fine it’s not spinning the water out of all clothes. Especially towels!! Could it be something slipping?? And it’s over 13 years old . Thanks for your help
    For model number Wm2350hrc
    Hello Fred, Thank you for your inquiry. Usually this is caused by the washer not spinning fast enough to spin all of the water out of the clothes or not draining properly. We would recommend checking the tub bearing, the stator, the rotor assembly, the motor rotor position sensor, and the drain pump. Check the bearing for any visible damage, and you can test the other parts with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Installation Instructions Provided by Fix customers like you.

      Average Repair Rating: 3.5 / 5.0, 8 reviews.
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        • Customer:
          CARLOS from EL PASO, TX
        • Parts Used:
          WPW10250667, 8316845, WP63907
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        just to understand the type and different model videos
        exactly as the video mentioned, just need to explain if some models are alike or different using the same part numbers will be awesome.in my case my washer had the screws in different areas to disassemble and Assembly the spare parts, other than that beautiful idea in sending the link video with the email confirmation let me tell you first class and top of the line customer service rated 5 Stars
        13 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Cesar from Kissimmee, FL
        • Parts Used:
          WPW10250667, WP63907
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        very easy
        Took of the housing to the washer and replaced the springs Thanks for your help
        4 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Jd from Cedar Springs, MI
        • Parts Used:
          WPW10250667, WP63907
        • Difficulty Level:
          Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers
        washer would walk and violently shake on spin cycle
        On the bottom of the control panel there are two Phillips head screws you have to take out. Flip up the control panel and it will rest on its own hardware. Next pop off both golden locking tabs that are now exposed from underneath the control panel. Now the whole porcelain body will slide off forward. Use pliers to take off and replace the 4 Springs. Assembly is the reverse.
        1 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Holly from Mechanicsburg, PA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Wrench (Adjustable)
        Pump leaked and needed replaced. Also replaced a rusted spring-unrelated to the pump.
        Removed washer shell. Propped washer front on 10 in 2x4 stilts. Unclipped the two clamps that hold the pump. Attempted to remove pump. Unsuccessful. Loosened the clamps that hold the motor and removed the motor. Still unable to remove pump from motor because they are rusted together. Happened to have a spare motor. When the new parts came in the mail, I put the replacement motor in the same way the old one came out. In error, I had purchased only one rubeer grommet, so I reused the four old ones. Clamped tge motor in place, Attached the new pump, Reattached the hoses to the pump, Reconnected the electric to the motor, Took out the stilts, Replaced the shell, Reattached the panel, Plugged it in, And started it up. Ready to do two weeks worth of laundry....
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Karl from Minneapolis, MN
        • Parts Used:
          WPW10250667, WP63907
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers, Socket set
        Machine vibrates excessively when in spin cycle either with or without clothes in washer.
        I watched the video tip on this site and then preformed my repair. This was a very easy repair and my washing machine no longer vibrates excessively in the spin cycle. I used a 5/16 nut driver to unscrew the fasteners and held the bracket with my hand to ease the tension. Make sure to put the spring on the same way it came off the bracket. Put some grease on the spring tips for lubrication. I had a slight challenge getting the enclosure reinstalled on my machine that took most of the repair time. Thanks for the fast shipping and helpful video on your website. I appreciate saving money and time.
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          James from MCEWEN, TN
        • Parts Used:
          WPW10250667, WP63907
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        washer would shake and dance all over the floor during spin cycle even if load was balanced out.
        To make a long story short, I watched the video on this parts website and followed their instructions. Worked perfectly. It came apart, parts replaced and assembled just as video stated. Simple repair. Thanks so much for the video help and will always come to this site for help and parts. Can't beat the delivery time also, ordered on sunday and parts were here on tuesday.
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Ryan from sherrard, IL
        • Parts Used:
          WPW10250667, WP63907
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        washer would vibrate bad during spin cycle
        Took outer cover off & replaced suspension springs
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Steve from Park Forest, IL
        • Parts Used:
          WPW10250667, WP63907
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Pliers, Screw drivers, Socket set
        Washer tub was very wobbly, too loose/noisy to use
        From the videos on the excellent web site, where instructional videos are available directly on the part-ordering window, I learned how to open up the machine and access the parts that needed to be replaced. I did not take the back off so only changed two of the three suspensions springs plus the tub spring, but the machine now runs fine. I had a little trouble getting the cabinet back on properly.
        0 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX11751118
          Manufacturer Part Number: WPW10250667
          Brand
          Model Number
          Description
          Kenmore
          10682872600
          Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
          Kenmore
          110088732791
          Washer Dryer Combo
          Kenmore
          11010202000
          Washer
          Kenmore
          11010202001
          Washer
          Kenmore
          1101050299
          Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
          Kenmore
          11010502990
          Washer
          Kenmore
          11010502991
          Washer
          Kenmore
          11010852990
          Washer
          Kenmore
          11010852991
          Washer
          Kenmore
          11012202100
          Washer
          Kenmore
          11012502100
          Washer
          Kenmore
          11012852100
          Washer
          Kenmore
          11013202200
          Washer
          Kenmore
          11013212200
          Washer
          Kenmore
          11014102300
          Washer
          Kenmore
          11014112300
          Washer
          Kenmore
          11014202300
          Washer
          Kenmore
          11014212200
          Washer
          Kenmore
          11014222300
          Washer
          Kenmore
          11014502300
          Washer
          Kenmore
          11014852300
          Washer
          Kenmore
          11015732400
          Washer
          Kenmore
          11016101690
          Washer
          Kenmore
          11016101691
          Washer
          Kenmore
          11016202690
          Washer
          Kenmore
          11016202691
          Washer
          Kenmore
          11016502690
          Washer
          Kenmore
          11016502691
          Washer
          Kenmore
          11016502692
          Washer
          Kenmore
          11016502693
          Washer