The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
Works with the following brands:
Whirlpool, KitchenAid, Maytag, Kenmore
Works with the following products:
Washer, Washer Dryer Combo
Fixes the following symptoms:
Will not agitate, Leaking, Does not dispense fabric softener or detergent, Marks left on clothes
Part# WPW10074580 replaces these:
AP6014843, 285551, 3347290, 3354733, W10074580
Works with the following brands:
Whirlpool, KitchenAid, Maytag, Kenmore
Works with the following products
Washer, Washer Dryer Combo
Fixes the following symptoms
Will not agitate, Leaking, Does not dispense fabric softener or detergent, Marks left on clothes
Part Number Cross Reference
Part# WPW10074580 replaces these:
AP6014843, 285551, 3347290, 3354733, W10074580
Videos For installing this part.
Replacing your Agitator Cap Barrier with Seal
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
January 8, 2022
#1 I watched your video on removing the Agitator Cap Barrier with Seal and it looked extremely easy but it will not come off for me. I don't want break the plastic. Do you have any suggestions on how to remove it?
#2 the other thing is the softener dispenser. The one I have is not as long as the one in your video. Mine actually looks like the one in the parts diagram that you show on your website. It comes as an assembly. What I need to know is the part inside the assembly is shaped like a cone. Does the suppose point upward or down ward, in the assembly?
Thank you for your time.
George
For model number 11029822800
Hello George, Thank you for your inquiry. You can try using a flat head screw driver or putty knife to gently pry up the sides of the cap or alternatively use a little bit of soap or oil to loosen the cap. The videos are made for multiple models and are designed to give you a general idea of the repair. The top part of the dispenser should say liquid fabric softener dispenser, and the tapered part should point downward. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
December 18, 2023
My agitator is barely moving, more like it's just shaking a little. I just replaced the agitator cogs (which were definitely worn down) but that did nothing to change the symptom. What should I try now?
Thank you.
For model number Mvwc300vw1
Hello Stephanie, thank you for contacting us. Based on the description that you have provided, we would recommend checking the agitator assembly, part number FIX11748301, to fix the issue. We hope this solves your problem!
Commonly referred to as dog ears, these agitator directional cogs are manufacturer approved replacement parts that come in a package of 4 and are usually used with direct drive washing machines. We recommend replacing al...
This is an OEM agitator repair kit that includes an agitator cam, four directional cogs, a bearing, thrust spacer, inner cap seal, and washer. These parts are found inside the agitator auger near the top. This kit is use...
This bolt is a genuine OEM replacement part, used to secure the agitator in your washing machine. Overtime the bolt can become worn out due to the vibrations of the washer, and will need to be replaced. The size of the s...
This is an authentic OEM agitator cam kit for your washing machine. The kit includes a bearing, the cam holder, and four individual cams. You may need to replace the agitator cam if you find your washer is noisy, it shak...
The thrust spacer is a genuine OEM part that is more commonly known as a retainer ring. The spacer is made of white plastic and measures approximately 2.5 inches in diameter. This part is found in between the agitator an...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Agitator not working correctly and leaking from somewhere underneath.
I watched the videos before I ordered the part and when the order arrived I replaced the parts with no problems. The most time consuming part of the job was cleaning the washer. You will be surprised to find what will accumulate down there after years of service. The order came in in record time so this site gets an A+ for being fast a
... Read morend accurate. No back-orders either. I will surely use for any-other parts I need in the future.
The clothes mover on the agitator was not turning properly.
This washer is 17 years old. The whole assembly didn't cost that much more than the parts I needed so I decided to replace the whole agitator assembly not just the dog ear assembly. The video on part select were helpful. I removed the fabric softener dispenser. Reached in and removed the cap barrier with seal. Did this by hand, needle nos
... Read moree pliers were not necessary. Remove the retaining bolt using a 7/16 socket wrench with a 8" extension. Reach in and grab the bottom of the lower agitator and pull the whole assembly straight up out of the washer. I assembled the new parts placing the thrust spacer on top of the agitator. I placed the preassembled cam with dog ears and bearing down into the bottom of the clothes mover. I placed the clothes mover onto the agitator making sure the cam assembly lined up with the thrust spacer properly before I snapped the clothes mover in place. This was the most difficult part of the assembly but was still easy I placed this assembly over the drive shaft of the washer and re-attached the retaining screw and washer. I coated the seal of the barrier cap with liquid detergent and placed it into the clothes mover. Snapped the fabric softener dispenser. Done, works great. It took longer for me to write this than it did to fix the washer.
Tipped the machine on its side , undo the two hose clamps and two pump clips, then pull pump off motor drive. assemble reverse. very easy .. surprised at simplicity of such an expensive machime
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
