OEM Whirlpool Washer Agitator Cap Barrier with Seal [WPW10074580] | Ships Today | Fix.com
Agitator Cap Barrier with Seal – Part Number: WPW10074580
Agitator Cap Barrier with Seal – Part Number: WPW10074580 https://fixcom.azureedge.net/Schematics/Maytag/OBEL0PDR.gif

Agitator Cap Barrier with Seal

Your Price
$5.72

Fix Number: FIX11748113

Manufacturer #: WPW10074580

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Works with the following brands

Whirlpool, KitchenAid, Maytag, Kenmore, Roper, Estate, Inglis, Amana, Crosley, Admiral, Magic Chef

Works with the following products

Washer

Fixes the following symptoms

Will not agitate | Leaking | Noisy | Does not dispense fabric softener / detergent

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 6 reviews
Customer:
Jerry from Aransas Pass, TX
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Agitator not working correctly and leaking from somewhere underneath.
I watched the videos before I ordered the part and when the order arrived I replaced the parts with no problems. The most time consuming part of the job was cleaning the washer. You will be surprised to find what will accumulate down there after years of service. The order came in in record time so this site gets an A+ for being fast and accurate. No back-orders either. I will surely use for any-other parts I need in the future.
7 of 7 people found these instructions helpful

Were these instructions helpful?   

Customer:
Richard from Belle Chasse, LA
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Top agitator not working
Pull top cap, bolt,remove agitator , pull top half off remove old parts install new parts! About 15 minutes total
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Josef from Oak Bluffs, MA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Leaks water as soon as tub starts to fill
Tipped the machine on its side , undo the two hose clamps and two pump clips, then pull pump off motor drive. assemble reverse. very easy .. surprised at simplicity of such an expensive machime
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Drew from Nibley, UT
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
The clothes mover on the agitator was not turning properly.
This washer is 17 years old. The whole assembly didn't cost that much more than the parts I needed so I decided to replace the whole agitator assembly not just the dog ear assembly. The video on part select were helpful. I removed the fabric softener dispenser. Reached in and removed the cap barrier with seal. Did this by hand, needle nose pliers were not necessary. Remove the retaining bolt using a 7/16 socket wrench with a 8" extension. Reach in and grab the bottom of the lower agitator and pull the whole assembly straight up out of the washer. I assembled the new parts placing the thrust spacer on top of the agitator. I placed the preassembled cam with dog ears and bearing down into the bottom of the clothes mover. I placed the clothes mover onto the agitator making sure the cam assembly lined up with the thrust spacer properly before I snapped the clothes mover in place. This was the most difficult part of the assembly but was still easy I placed this assembly over the drive shaft of the washer and re-attached the retaining screw and washer. I coated the seal of the barrier cap with liquid detergent and placed it into the clothes mover. Snapped the fabric softener dispenser. Done, works great. It took longer for me to write this than it did to fix the washer.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
JANET from BUFFALO, MN
Parts Used:
  • Agitator Cap Barrier with Seal
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Seal was broken
Pulled the top off and placed the cap in place with seal in place.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Barry from Mayfield, KY
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Would not agitate clothes to good, they were not coming clean
I followed the repair video you have on this. It was very easy to do. thank you.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX11748113
Manufacturer Part Number: WPW10074580
Brand
Model Number
Description
Kenmore
11016922500
Washer
Kenmore
11016922501
Washer
Kenmore
11016922502
Washer
Kenmore
11016922503
Washer
Kenmore
11016922504
Washer
Kenmore
11016942500
Washer
Kenmore
11016942501
Washer
Kenmore
11016942502
Washer
Kenmore
11016942503
Washer
Kenmore
11016962500
Washer
Kenmore
11016962501
Washer
Kenmore
11016962502
Washer
Kenmore
11016962503
Washer
Kenmore
11016964500
Washer
Kenmore
11016964501
Washer
Kenmore
11016964502
Washer
Kenmore
11016964503
Washer
Kenmore
11016972500
Washer
Kenmore
11016982500
Washer
Kenmore
11016984500
Washer
Kenmore
11016986500
Washer
Kenmore
11020052990
Washer
Kenmore
11020052991
Washer
Kenmore
11020056991
Washer
Kenmore
11020072990
Washer
Kenmore
11020092990
Washer
Kenmore
11020096990
Washer
Kenmore
11020097990
Washer
Kenmore
11020112310
Washer - AUTOMATIC WASHER
Kenmore
11020112311
Washer - WASHER