Ratings submitted by customers like you who bought this part.
?
$71.61
In Stock
Fix Number: FIX11747977
Manufacturer #: WPW10006355
Manufactured by: Whirlpool
Product Description
This part changes the transmission from agitation to spin mode. This actuator is for washers.
Actuator shifts the splutch and monitors the position of the splutch.
Works with the following brands
Whirlpool, Maytag, Kenmore, Amana
Works with the following products
Washer
Fixes the following symptoms
Will not agitate, Will Not Start, Spins slowly, Will not drain
This part changes the transmission from agitation to spin mode. This actuator is for washers.
Actuator shifts the splutch and monitors the position of the splutch.
Works with the following brands:
Whirlpool, Maytag, Kenmore, Amana
Works with the following products:
Washer
Fixes the following symptoms:
Will not agitate, Will Not Start, Spins slowly, Will not drain
Part# WPW10006355 replaces these:
AP6014711, W10006355, WPW10006355VP
Videos For installing this part.
Replacing your Shift Actuator - 120V 60Hz
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
December 20, 2021
My washer does not seem to spin the drum. It makes clicking noises and the drum will jerk slightly.
For model number MVWX700XW2
Hello Randy, thank you for writing. We find the part you had chosen to be the correct resolution. The Fix Number: FIX11747977- This part changes the transmission from agitation to spin mode. This actuator is for washers. Actuator shifts the clutch and monitors the position of the clutch. We have an installation video for you to access. We hope to hear from you soon.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jeremy
September 18, 2022
I replaced the shift actuator and latch switch thinking this was the issue, and if not the latch, the actuator
Would fix it. However that didn’t work. My unit will just start buzzing instead of doing anything. It also stops mid cycle. What else could it be?
For model number mvwx600xw1
Hello Jeremy, thank you for contacting us. We would recommend checking the following parts to fix your issue: , Drive Motor, part number FIX11727863 and the Control Board FIX3653303. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Does the shift actuator failure cause the drum to spin faster (like spin mode) during sensing stage and cause the spin speed to sound loud and faster than normally?
For model number 110.21302013
Hello Kevin, thank you for your question. A problematic shift actuator can produce speed variations. We would also recommend checking the motor assembly, part number FIX11726282, and making sure no wire is short in the motor. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.1 / 5.0, 2 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Once I went on UTube and got an idea as to what was wrong, I found the tech manual on the inside of the washer and tipped the washer over and took off the sound insulation pad. I then unscrewed the plastic guard over the shift actuator, and unplugged it from it's power source and plugged in the new part I got from this site. Once the repair was completed, I put all parts back together, and calibrated my washer (so easy!). I'm very impressed with how fast I got the part. In less than 24 hrs, I had my washer running like new. Thanks for your quick delivery! Patti .
Followed instructions found in technicians manual.
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
1
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronald J - April 12, 2020
Verified Purchase
Fixed and washer Running within an hour
Running within an hourOnline ordering went well apartment came on time instruction video was a great help put the pardon washer is running within the hour and doing close save the big expense by doing it myself thanks to the video on how to repair it and the part coming on time thank you
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11747977
Manufacturer Part Number: WPW10006355
