The suspension rods help to keep the tub in your washing machine stable and secure while cycling through your laundry. If your washer is excessively vibrating, moving around, or very loud when operating, there may be an issue with your suspension. This authentic OEM replacement kit includes 4 rods, 4 suspension balls, and 4 bushings. The parts come assembled and ready to be installed. You will need to disconnect the power supply, water inlet and drain hoses from the washer before beginning this repair.
Works with the following brands:
Whirlpool, Maytag, Kenmore, Amana
Works with the following products:
Washer
Fixes the following symptoms:
Shaking and Moving, Spinning Issues
Part# W10780048 replaces these:
AP5971398, W10215136, W10257087, W10257088, W10349191, W10349193
...
Show more, W10748952, W10821948, WPW10780048 Show less
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edward
November 26, 2022
I need the suspension rods for this model-Admiral. W10420468 B
For model number ATW4675YQ1
Hello Edward, thank you for your question. The Washing Machine Suspension Rod Kit PS11703290. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nora
October 22, 2023
I have replaced all 4 suspension rods and still have some banging. What do I check next?
For model number NTW4600YQ0
Hi Nora, thank you for your inquiry. If you have already replaced the suspension rods and the issue persists, you may need to make sure that the tub is properly in place and not loose. If that is not causing the issue, then you may need to check the drive pulley, part number FIX10057144, as it is most likely faulty and may need to be replaced. We hope this solves your problem!
I’m looking for suspension springs for this model. Do you have something similar? What is the length of you rods/spring that you offer?
Thank you.
For model number WTW4800B01
Hi Christina, thank you for your inquiry. The suspension rod kit for your model is part number FIX11703288. It is approximately 26.7 inches in length. We hope that helps!
This tub centering spring is a genuine OEM replacement part for your washing machine. If your washer is noisy or excessively shaking while it is operating, you may need to replace the springs. The metal springs are used ...
If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that your washer runs smo...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
I removed the top section and control panel(disconnected one hose and electrical connector . Layed complete washer on back side. Slid washer bucket up towards the top. Installed all 4 rods into place. Then tipped washer back on its legs and reassembled. Rechecked washer was level. Note: I inspected the old rods and compared to new and fou
... Read morend no issues with old ones. Most likely weak springs. Runs like new now. Also noticed before complete barrel was hanging low and is now higher with new rods installed.
and we thought simply putting it back on would solve the problem but obviously you need to replace all the spring/ rods when this happens. Had to take the complete housing/ outside of washer apart to expose the drum and suspension rods. Easy to replace rods at this point.
13 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(3 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
3
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis G - March 6, 2022
Verified Purchase
Washer out of balance
Followed directions I got from several u tube videos and was able to get the repair done in about an hour. Saved $$$ on a service call and or buying a new washer. Got the parts from Fix .com in a couple of days after order was placed.
★★★★★
★★★★★
Sergio G - January 27, 2022
Verified Purchase
Perfect fit.
Thank you. The part that I purchased was perfect! Everything went great. My washing machine is running like new.
★★★★★
★★★★★
Kevin B - October 26, 2021
Verified Purchase
new suspension kit
exactly what I needed thank you
Model Compatibility
This part works with the following models:
Fix Number: FIX11703290
Manufacturer Part Number: W10780048
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
