Lid Hinge Pin
Works With Model HAV2557AWW!
$21.78
In Stock
Fix Number: FIX11741781
Manufacturer #: WP35-2045
Manufactured by:
Whirlpool
Works With Model HAV2557AWW!
-
Product Description
This lid hinge pin is just over an inch long. It is all white in color and is made entirely of plastic. Sold individually.
-
Works with the following brandsNorge, Admiral, Maytag, Magic Chef
-
Works with the following productsWasher
-
Fixes the following symptomsLid or door won’t close, Will Not Start
-
Part Number Cross ReferencePart# WP35-2045 replaces these:AP6008641, 35-2045
Product Description
This lid hinge pin is just over an inch long. It is all white in color and is made entirely of plastic. Sold individually.
-
Works with the following brands:Norge, Admiral, Maytag, Magic Chef
-
Works with the following products:Washer
-
Fixes the following symptoms:Lid or door won’t close, Will Not Start
-
Part# WP35-2045 replaces these:AP6008641, 35-2045
Videos For installing this part.
Replacing your Lid Hinge Pin
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Thomas from Glencoe, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Broken lid hinge pin.
Removed lid and than removed the lid hinge pins. Installed both new lid hinge pins onto lid. Released clips on front of machine in order to raise top of washer. Removed both original lid hinges. Installed one new lid hinge and installed lid with other lid hinge set in place. Lined up second new lid hinge with hole and installed screw. Lowered top of washer over clips and the job was complete. Received the correct parts which made the job very easy. Perfect, works like new. Thanks for your great service.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Timothy from Woodhaven, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Socket set, Wrench (Adjustable)
Washer pump was broken, making loud continuous noise.
First, make the back of the washer accessable. Second, remove 4 screws holding the plate cover in left rear of washer. Third, use adjustable pliers to remove both hoses. Fourth, use a 10mm socket, and remove the three hold down screws at the base of the water pump. The belt tension will release automatically, when the pump is unbolted. Fifth, reverse same steps. Last, tip the washer forward, and place belt on the transmission pulley and the motor pulley. The motor itself is adjustable with spring tension, allowing you to move the motor itself, while placing the belt on the water pump pulley. When you allow the spring tension of the motor to spring back in place, your belt will be tight. Place water pump cover (access panel) back in place. Your washer is ready to be used.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:TODD from HOFFMAN ESTATES, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Broken plastic hinge pins
Pry open top section Remove hinge blocks and top don't drop screws remove pin blocks from lid .reinstall pin blocks on lid. slide hinge blocks on to lid assy and rescue whole unit back on to top section. Close the top section done
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Harold from Lanett, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Hinge broken
Replaced both sides. Used a narrow stiff paint scraper to pop the top off. Pulled the washer out, tilted the top back, removed the the screws with the Six inch ratchet with two inch Phillip head driver. This is easier than a screw driver. More torque required on the hard to remove screws. I put the hinge and pins on, set in place to tighten the last two screws in place. Without screws being hard to remove, probably 20 minute job.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Daniel from Flanders, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Hinge pin broke on both sides of top. Replaced both the hinge and pin, very easy.
Popped up top to expose screws for hinges. Unscrewed old one, put new one in place. Done! It was that simple.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marvin M - May 21, 2021
Verified Purchase
Washing Machine Hinge Pin
Order was received on schedule and repair was made with no issues.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11741781
Manufacturer Part Number: WP35-2045
Manufacturer Part Number: WP35-2045
Brand
Model Number
Description