( Grid squares measure 1x1 inch )

Tub Seal and Bearing Kit

$128.84
Fix Number: FIX3503261
Manufacturer #: W10435302
Manufactured by: Whirlpool

Product Description

This kit includes the shaft, 3 bearings, seals , grease, adhesive and the spanner nut, which is NOT sold separately. Also may require a bearing driver tool to install. PS3503307

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 1.5 / 5.0, 1 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Frederick from Sterling, CO
    • Parts Used:
      W10435302, W10820039
    • Difficulty Level:
      Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
    Loud noise, grease at bottom of washer and on floor
    First of all thanks to this site for the right parts good instructions and fast delivery. I didn't get the bearing tool so I used a metal spike used to set concrete forms to remove the bearings and wood block to replace them 1. Remove the back of the washer with a screwdriver and Tape the lid to the top of the washer. 2. use a screwdriver or wood chisel to release the two catches on the front of the top and lift the top up and over (I used a chair to hold it). 3. remove agitator cover and find the bolt, remove the bolt and lift the agitator and gears out of the machine. Lift the center basket out and set it aside. 4.Set the washer on it side so you can get to the bottom of the machine (I leaned mine against a chair with a blanket in between to keep from scratching it). Remove the allen screw at the bottom of the rotor/motor. remove the outer part of the rotor/motor. 5. remove the 4 bolts and the plate securing the inner rotor/motor and pull it down so you can remove the plastic sensor holding the electrical connections. 6. Remove the second plate, if it hasn't fallen, and you will see the lower bearing and shaft. 7. Set the washer up and remove the shaft from the top. 8. Take the spike and hammer and, from the top , tap the lower bearing out. 9. Return the washer to the side position and from the bottom tap the upper bearing out. 10. clean up the grease and such from the machine. 11. Using a piece of soft wood as close to the same size as the bearing tap the new bearings back into place, switching positions on the washer as needed. Be careful with the bearings try to tap easy and make sure the bearings are going on straight. 12. Install the shaft into the bearings from the top, using the instructions supplied with the parts. 13. Install the rubber gasket per the instructions as well. 14. Put the agitator and gears back together. 15. Install the rotor/motor and sensor. 16. Secure the top and remove the tape.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX3503261
      Manufacturer Part Number: W10435302
      Brand
      Model Number
      Description
      Kenmore
      11027086600
      Washer - RESIDENTIAL WASHER
      Kenmore
      11028103310
      Washer - WASHER
      Maytag
      7MMVWB850WL0
      Washer - AUTOMATIC WASHER
      Maytag
      MTW6300TQ1
      Washer - RESIDENTIAL WASHER
      Maytag
      MVWB300WQ0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB300WQ1
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB300WQ2
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB400VQ0
      Washer - RESIDENTIAL WASHER
      Maytag
      MVWB450WQ0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB450WQ1
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB450WQ2
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB455YQ0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB700VQ0
      Washer - RESIDENTIAL WASHER
      Maytag
      MVWB750WB0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WB1
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WB2
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WL0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WL1
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WL2
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WQ0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WQ1
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WQ2
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WR0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WR1
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB750WR2
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB755YL0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB755YQ0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB755YR0
      Washer - AUTOMATIC WASHER
      Maytag
      MVWB800VB0
      Washer - RESIDENTIAL WASHER
      Maytag
      MVWB800VQ0
      Washer - RESIDENTIAL WASHER