Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Washer Timer
$229.91
In Stock
- Fix Number:
- FIX11748352
- Manufacturer #:
- WPW10111389
- Manufactured by:
- Whirlpool
- Product Description
- The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
- Works with the following brands:
- Maytag, Whirlpool
- Works with the following products
- Washer
- Part# WPW10111389 replaces these:
- AP6015080, W10111389
Part Number Cross Reference
Product Description
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
-
Works with the following brands:Maytag, Whirlpool
-
Works with the following products:Washer
-
Part# WPW10111389 replaces these:AP6015080, W10111389
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Lawrence from Temeculas, CA
- Parts Used:
- WPW10111389
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Timer malfunction - wash cycle extended to 2 hours
I used a flat tip screw driver to remove the cover plate on the timer knob (be gentile as there are 4 flat plastic mounts that can easily break off (I broke 1). I used a radiator hose tool to depress in the center of the knob to release the 2 plastic hooks to pull the knob off. I used the radiator hose tool to gently remove the back kno
... Read more
b plate (chrome). I used the putty knife to depress the clips on each side of the control panel (bottom front each side) and the control panel easily popped up. I rotated back to reveal back of all control modules. I used the radiator hose tool to easily depress the electrical connector clips to easily pull out the 2 wiring harness plugs. I then used the radiator hose tool to get behind and depress the stationary snap brace so I could easily slide the entire timer mechanism to the right so as to remove it. I then attached the new timer and slid to the left until the stationary snap clipped into place. I then connected both wiring harnesses. I then cleaned under the control panel w/cleaner and brillow pad as it was dirty. I then aligned the control panel so the rear bottom plastic hooks fit in the top and then rotated down and forward so the 2 metal clips clicked into place and the control panel was attached. I then cleaned the chrome back knob and attached paying close attention to the key. I then snapped the main control knob on so the 2 plastic hooks clicked into place and finally, I depressed the cover plat on the control knob aligning the 3 unbroken flat plastic mounts and I was finished in less than 15 minutes. Very easy job.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11748352
Manufacturer Part Number: WPW10111389
Manufacturer Part Number: WPW10111389
Brand
Model Number
Description
✖
Mail-In Recycling Rebate