Part Location Diagram of WP34001340 Whirlpool Drain Pump - 120V 60Hz
See part 34 in the diagram
Replacing your Maytag Washer Drain Pump - 120V 60Hz
( Grid squares measure 1x1 inch )

Drain Pump - 120V 60Hz

Works With Model MAH8700AWW!
★★★★★
★★★★★
2 Reviews

Rated by 5 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$164.24
In Stock
Fix Number:
FIX11741568
Manufacturer #:
WP34001340
Manufactured by:
Whirlpool
Works With Model MAH8700AWW!

Product Description

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. NOTE: Pump only, mounting bracket is NOT included.

Videos For installing this part.

Replacing your Drain Pump - 120V 60Hz

Replacing your Drain Pump - 120V 60Hz

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 5 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Rondi from Phx, AZ
Parts Used:
WP34001340
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Washer would not drain. All electronics worked chiming worked so I knew something was wrong with the pump.
I pulled out the washing machine after I had drained out all washer water left in the bottom of the washer, then I found the old pump, unscrewed it, and unhooked it. I looked inside the old pump and saw that the flanges were indeed damaged. All I did then was installed the new pump and then hook it up. I plugged the machine in and ran a small load. It's been working like a charm ever since. I really can't believe how easy it was. Very very happy with this site . Will definitely use again and recommend.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from Los Gattos, CA
Parts Used:
WP34001340
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
noise in pump mode. Broken impellar from foreign object. out of balance when pumping.
very easy to install new pump. Hardest part was pulling machine out from cabinet. Use a shop vac. to pull excess water from pump and hoses.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Denise from Las Vegas, NH
Parts Used:
WP34001340
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
My machine would not drain and was giving an error code
Took off the back panel, slid the hoses off the drain pump, unscrewed the bracket that was holding the drain pump, unscrewed the drain pump from the bracet, placed the new drain pump on the bracket, replaced the bracket, replaced the hoses, turned on the machine and everything is working wonderfully. It's great to be able to do full load s again. Thank you
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vicky from Rangely, CO
Parts Used:
WP34001340
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
my old pump had sucked coins into it and it wouldn't drain any more
I took the back plateo ff my washer took the electrical c onnection lose. Released the hose clamps pulled t he hoses off Unscrewed the metal plate that attaches the pump to the washer. Unscrewed the screws that hold the pump to the plate and switched pumps.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tina from Lancaster, TX
Parts Used:
WP34001340
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
drain pump replaced
Removed the back panel then three nuts that held the drain to a plate attached to the floor of the washer. It made things easier to work on. The new drain has a plastic attachment that the hose attaches to, i had to remove and use the old plastic because the new one would not fit the floor plate. Once i got that transferred to the new mo tor and attached to the plate it went easy from there - just attach the hoses.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11741568
Manufacturer Part Number: WP34001340
Brand
Model Number
Description
Inglis
IFW7200TW10
Washer - Residential, Automatic
Maytag
MAH6700AWM
Washer - Residential
Maytag
MAH6700AWW
Washer - Residential
Maytag
MAH8700AWM
Washer - Residential
Maytag
MAH8700AWW
Washer - Residential
Maytag
MAH9700AWM
Washer - Residential
Maytag
MAH9700AWW
Washer - Residential
Amana
NFW7200TW10
Washer - Residential
Amana
NFW7200TW11
Washer - AUTOMATIC WASHER