This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Works with the following brands:
Maytag
Works with the following products:
Washer
Fixes the following symptoms:
Leaking, No hot or cold water
Part# WP22004333 replaces these:
AP6006446, 22004191, 22004333
Works with the following brands:
Maytag
Works with the following products
Washer
Fixes the following symptoms
Leaking, No hot or cold water
Part Number Cross Reference
Part# WP22004333 replaces these:
AP6006446, 22004191, 22004333
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose Zendejas
December 15, 2025
This unit does not throw water, nor hot or cold. What could be causing this issue.
For model number MAV6260AWW
Hi Jose, thank you for reaching out. We would recommend checking the water inlet valve, part number FIX11739520. A faulty water inlet valve prevents the machine from receiving water because its internal solenoids fail to open when electrically signaled by the washer's controls. This results in either the screens being blocked by sediment or the electrical components failing to physically open the water pathway. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.6 / 5.0, 3 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Unplugged washer and disconnected water lines from back of washer. Used putty knife to slide between top of washer and cabinet to release latches that hold them together ( in front about two inches from each corner). Lifted top all the way back to have easy access to valve. Unplugged wiring from valve and removed two screws with socket an
... Read mored slid out old valve. Slid new valve in place, attached screws and wiring, closed top, reattached hoses to back of washer and plugged back in. All done in about 20 minutes.
Down loaded Maytag's manual went on this site. I called & explained my problem & gave them the model number,order the Valve. it was that easy & saved lots of money..............
washer would not stay in balance and at times cold water would not completely shut off
case top and front had to be removed, belt to pully removed, tub springs removed, install new snubber ring, remove and replace water valve. Hardest part of repair was putting springs back onto tub used vise grips to assist.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11739520
Manufacturer Part Number: WP22004333
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.