Maytag/Maytag_Thumb/37308.gif
See part 9 in the diagram
Replacing your Maytag Washer Plastic Injector Nozzle play video
( Grid squares measure 1x1 inch )

Plastic Injector Nozzle

$8.79
Fix Number: FIX11738878
Manufacturer #: WP213015
Manufactured by: Whirlpool

Product Description

This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.

Videos For installing this part.

Replacing your Plastic Injector Nozzle

Replacing your Plastic Injector Nozzle play video
Questions and Answers

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.
    Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    James
    January 27, 2022
    Does the ejector comes with the black rubber cover.
    For model number A208
    Hello James, thank you for writing. The injector nozzle does not come with a black rubber cover. The only part we can see that you may be referring to is the Injector Hose. This washing machine injector hose runs from your washer's inlet to its injector. It is black and made of rubber. We hope this helps!

    Was this helpful?
    Thank you for voting!

      Installation Instructions Provided by Fix customers like you.

      Average Repair Rating: 3.5 / 5.0, 6 reviews.
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        • Customer:
          Albert from Unadilla, NY
        • Parts Used:
          WP216201, WP213015, WP596669
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        noticed water was leaking in front of washer-right before we were leaving for vacation
        Upon returning from vacation, we needed to do laundry-so I put some plastic under the washer and we did a load. The water was leaking from the seam between the lid and the back panel on the side with the hot and cold water connections- not the front. I removed two screws from the front bottom panel and two screws from the underside of the lid.Turning the washer on showed the leak was coming from the injection valve( it was brittle from age). The rubber injection valve was replaced and installed( using a little liquid soap to help the rubber hose to slip over the rubber injection valve) with a new clamp. The leak was fixed.
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Burr from GREELEY, CO
        • Parts Used:
          WP216201, WP213015
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers, Socket set
        rubber water injector valve had failed and was leaking water.
        Viewed the You Tube video, which was excellent.
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          heinz from amherst, NY
        • Parts Used:
          WP216201, WP213015, 206154
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        water leak far left corner
        removed front panel via two screws near bottom, then lift top to expose water injecter hose. I pulled control knob to activate water fill to verify were it was leaking. Once replaced,I reactivated water fill to verify no leaks.
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          susan from milwaukee, WI
        • Parts Used:
          WP216201, WP213015
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Socket set
        washer leaked from the bottom when FILLING
        The U-Tube video from this site was great. SHOULD have taken a half-hour-- tops-- but the most difficult part was freeing up one of the screws at the bottom of the front panel. Finally had to drill it out. AFTER COMPLETING THE ACTUAL REPAIR, the leaking problem was solved.
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Crawford from Lancaster, SC
        • Parts Used:
          WP216201, WP213015
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Socket set
        The Inlet Valve was leaking every time the washer would fill to start washing. The water would run out the side near the top.
        I removed the front cover and disconnected the bleach filler tube from the top cover. I removed the two screws that held the top cover on and tilted the top cover back. I located the injector valve and determined that it was bad by starting the washer while watching the valve run over into the floor. I loosened the first clamp on the injector valve and slipped the injector valve and plastic nozzle out. I slid the new plastic injector nozzle into the new rubber injector valve. I rubbed a little grease around the rim of the injector valve so it would slide back into the hose easily into place. I reconnected the hose clamp and started the washer. No more water leak. I connected the bleach filler tube and put the covers back on. I put the washer back into it's place and started washing clothes. Its been two weeks and I haven't seen any water in the floor. This includes about six loads of clothes.
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          janetjean from fairbury, NE
        • Parts Used:
          WP216201, WP213015
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        leaking
        Looked it up on your site , watched the video, odered the part and put it on. Seems to have been the problem because it is not leaking now . Thank You for your prompt service
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX11738878
          Manufacturer Part Number: WP213015
          Brand
          Model Number
          Description
          Maytag
          A104
          Washer - Top Loading
          Maytag
          A105
          Washer - Top Loading
          Maytag
          A106
          Washer - Top Loading
          Maytag
          A106S
          Washer - Residential
          Maytag
          A107
          Washer - Top Loading
          Maytag
          A107S
          Washer - Residential
          Maytag
          A108
          Washer - Top Loading
          Maytag
          A108S
          Washer - Residential
          Maytag
          A110
          Washer - Top Loading
          Maytag
          A112
          Washer - Top Loading
          Maytag
          A15CA
          Washer
          Maytag
          A15CM
          Washer
          Maytag
          A15CT
          Washer
          Maytag
          A16CA
          Washer
          Maytag
          A16CM
          Washer
          Maytag
          A16CT
          Washer
          Maytag
          A17CA
          Washer
          Maytag
          A17CM
          Washer
          Maytag
          A17CT
          Washer
          Maytag
          A180
          Washer - Top Loading
          Maytag
          A181
          Washer - Top Loading
          Maytag
          A182
          Washer - Top Loading
          Maytag
          A183
          Washer - Top Loading
          Maytag
          A18CA
          Washer
          Maytag
          A18CM
          Washer
          Maytag
          A18CT
          Washer
          Maytag
          A190
          Washer - Top Loading
          Maytag
          A1910
          Washer - Top Loading
          Maytag
          A206
          Washer - Top Loading
          Maytag
          A206S
          Washer - Top Loading