Plastic Injector Nozzle
$10.35
In Stock
Fix Number: FIX11738878
Manufacturer #: WP213015
Manufactured by:
Whirlpool
-
Product Description
This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.
-
Works with the following brandsMaytag, Jenn-Air
-
Works with the following productsWasher, Washer Dryer Combo
-
Fixes the following symptomsLeaking
-
Part Number Cross ReferencePart# WP213015 replaces these:AP6005818, 213015
Product Description
This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.
-
Works with the following brands:Maytag, Jenn-Air
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Leaking
-
Part# WP213015 replaces these:AP6005818, 213015
Videos For installing this part.
Replacing your Plastic Injector Nozzle
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
January 27, 2022
Does the ejector comes with the black rubber cover.
For model number A208
Hello James, thank you for writing. The injector nozzle does not come with a black rubber cover. The only part we can see that you may be referring to is the Injector Hose. This washing machine injector hose runs from your washer's inlet to its injector. It is black and made of rubber. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Albert from Unadilla, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
noticed water was leaking in front of washer-right before we were leaving for vacation
Upon returning from vacation, we needed to do laundry-so I put some plastic under the washer and we did a load. The water was leaking from the seam between the lid and the back panel on the side with the hot and cold water connections- not the front. I removed two screws from the front bottom panel and two screws from the underside of the lid.Turning the washer on showed the leak was coming from the injection valve( it was brittle from age). The rubber injection valve was replaced and installed( using a little liquid soap to help the rubber hose to slip over the rubber injection valve) with a new clamp. The leak was fixed.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Burr from GREELEY, CO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
rubber water injector valve had failed and was leaking water.
Viewed the You Tube video, which was excellent.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:heinz from amherst, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
water leak far left corner
removed front panel via two screws near bottom, then lift top to expose water injecter hose. I pulled control knob to activate water fill to verify were it was leaking. Once replaced,I reactivated water fill to verify no leaks.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:susan from milwaukee, WI
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set
washer leaked from the bottom when FILLING
The U-Tube video from this site was great. SHOULD have taken a half-hour-- tops-- but the most difficult part was freeing up one of the screws at the bottom of the front panel. Finally had to drill it out. AFTER COMPLETING THE ACTUAL REPAIR, the leaking problem was solved.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Crawford from Lancaster, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
The Inlet Valve was leaking every time the washer would fill to start washing. The water would run out the side near the top.
I removed the front cover and disconnected the bleach filler tube from the top cover. I removed the two screws that held the top cover on and tilted the top cover back. I located the injector valve and determined that it was bad by starting the washer while watching the valve run over into the floor. I loosened the first clamp on the injector valve and slipped the injector valve and plastic nozzle out. I slid the new plastic injector nozzle into the new rubber injector valve. I rubbed a little grease around the rim of the injector valve so it would slide back into the hose easily into place. I reconnected the hose clamp and started the washer. No more water leak. I connected the bleach filler tube and put the covers back on. I put the washer back into it's place and started washing clothes. Its been two weeks and I haven't seen any water in the floor. This includes about six loads of clothes.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:janetjean from fairbury, NE
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
leaking
Looked it up on your site , watched the video, odered the part and put it on. Seems to have been the problem because it is not leaking now . Thank You for your prompt service
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11738878
Manufacturer Part Number: WP213015
Manufacturer Part Number: WP213015
Brand
Model Number
Description