Water Valve - 60/40 WP21001932
Works With Model LNC6762A71!
$122.98
In Stock
- Fix Number:
- FIX11738838
- Manufacturer #:
- WP21001932
- Manufactured by:
- Whirlpool
Works With Model LNC6762A71!
Jump to:
Product Description
This water valve is for 60% hot water and 40% cold - This is done to save on energy.
-
Works with the following brands:Maytag, Admiral, Crosley, Magic Chef
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# WP21001932 replaces these:AP6005779, 21001747, 21001932
- Works with the following brands:
- Maytag, Admiral, Crosley, Magic Chef
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# WP21001932 replaces these:
- AP6005779, 21001747, 21001932
Part Number Cross Reference
Videos For installing this part.
Replacing your Water Valve - 60/40
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- JIM from RICHMOND, KY
- Parts Used:
- WP21001932, WP21001554
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
water would over fill.
Looked at your site and got great advice for this problem. Most people on your site explained how the a hole in the fill tube was the most likely culprit. Because there was so much damage to my house, I over did it and replaced the water level switch and the water valve. Thinking the fill tube was ok. It did turn out to be a small hole
... Read more
in the fill tube that caused the over fill problem. But I was hard headed and changed out the other parts instead only to find that even with the new parts the washer still over filled. I replaced the fill tube and all was good. Then found the pin size hole in the fill tube. The hole may not be noticeable. But the tube (part) is cheap so it is the best first place to start with solving your over filling problem.
Read less
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jimmy from JONESBORO, AR
- Parts Used:
- WP21001932
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
water would not shut off
remove supply lines lift top remove one screw in back one hose clamp replace water valve.
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Armin H from Webster, NY
- Parts Used:
- WP21001932
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
no cold water
only problem was hose clamp. Would have very easy if hose was about 3" longer. Job was simple
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- samuil from Pierce City, MO
- Parts Used:
- WP21001932
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
Water ran over top of tub onto floor
Took inspection plate off back of washer near bottom.Removed the two screws on back near the top that hold the top cover on. Removed the wires and screws from the water valve. Raised the top lid removed hose from water valve.Repaced new water valve connected wires and mounting screw. Reaplaced all screws and covers. works perfectly.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11738838
Manufacturer Part Number: WP21001932
Manufacturer Part Number: WP21001932
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.