This is an original manufacturer door gasket with a drain hole, for a front-load washer. If you require a door gasket without a drain hole, that is sold separately. Door gaskets are also commonly referred to as a door boot seal or bellow. The door gasket forms a seal between the door and tub, and the drain port allows for water drainage. A few symptoms related to this part include leaking, unusual sounds, poor performance, a burning smell, and a door that will not shut or seal properly. Be sure to keep your washer door gasket clean, and never overload your washer.
Works with the following brands:
LG, Kenmore
Works with the following products:
Washer
Fixes the following symptoms:
Leaking, Burning smell, Marks left on clothes
Part# 4986ER0004F replaces these:
AP4439003, 1377588, 4986ER0004F, 4986ER0004F, 4986ER0004K, 4986ER0004M
...
Show more, 4986ER0004N, MDS64237203 Show less
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Louie
February 17, 2025
My washer is a 2013 kenmore front loader the gasket ripped but the gasket that is said to fit is too big MDS65736902
Need advise
For model number 79641373211
Hello Louie, Thank you for reaching out. The only Gasket listed for this model is Manufacturer #: MDS65736902. For more specialized assistance or to speak with someone about this, we would suggest calling Kenmore or LG as this model was originally made by LG. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 2.5 / 5.0, 3 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Unplugged front door locking mechanism and then removed filter housing and soap dispenser housing. Now removed the front door. Now I removed the top panel by removing the screws and sliding the top back about 1 inch and raising it up. Now I removed the 2 spring tension wires holding the rubber gasket in place with a screw driver. Provide
... Read moreleverage at the spring. Then I installed rubber gasket and put spring tension wires back in place. Pretty difficult to install spring tension wires. Make sure they go back in the same position as they were originally.
Replaced the tub bearings, seal and the 3 shocks. The most difficult part was the removal of the axle. I suggest you spray the axle with WD-40 and leave this at least 1 day. Clean the Tub and outer part with a high pressure spray (if available). Once completed the washer is performing as a brand new washer. The parts were delivered on-t
... Read moreime and prices were reasonable. I highly recommend this supplier.
Read less
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3524977
Manufacturer Part Number: 4986ER0004F
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.