7785070-1-M-LG-4280EN4001D-BEARING,BALL
Part Location Diagram of 4280EN4001D LG BEARING,BALL
See part K122 in the diagram
( Grid squares measure 1x1 inch )
7785070-1-S-LG-4280EN4001D-BEARING,BALL 7785070-2-S-LG-4280EN4001D-BEARING,BALL Part Location Diagram of 4280EN4001D LG BEARING,BALL

BEARING,BALL

Rated by 7 customers 

?

Easy 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

?
$49.27
On Order
Fix Number:
FIX7785070
Manufacturer #:
4280EN4001D
Manufactured by:
LG
Product Description
This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the washer tub. This model is sold individually and measures to have a 2.5-inch outer diameter. As this bearing is very difficult to install, the manufacturer recommends completely replacing the rear tub and bearing assembly. If you are only installing the rear bearing, consider replacing the seal and the other bearing as they wear out together.
Works with the following brands:
LG, Kenmore
Works with the following products
Washer, Washer Dryer Combo
Part Number Cross Reference
Part# 4280EN4001D replaces these:
4280EN4001N, 4280EN4001S, 4280EN4001Y, 4280FR4048E, AGF76083931
6 Related Parts Questions and Answers 7 Installation Instructions Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the washer tub. This model is sold individually and measures to have a 2.5-inch outer diameter. As this bearing is very difficult to install, the manufacturer recommends completely replacing the rear tub and bearing assembly. If you are only installing the rear bearing, consider replacing the seal and the other bearing as they wear out together.

  • Works with the following brands:
    LG, Kenmore
  • Works with the following products:
    Washer, Washer Dryer Combo
  • Part# 4280EN4001D replaces these:
    4280EN4001N, 4280EN4001S, 4280EN4001Y, 4280FR4048E, AGF76083931

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Rear Tub Gasket
★★★★★
★★★★★
(2)
$31.60
In Stock
Part Number: FIX3522855
Gasket
$30.78
In Stock
Part Number: FIX3535219
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tub and the drive shaf...
BEARING,BALL
$63.71
In Stock
Part Number: FIX7785069
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issu...
GASKET
$21.35
On Order
Part Number: FIX7795305
BEARING,BALL
$71.38
In Stock
Part Number: FIX11705913
DAMPER ASSEMBLY,FRICTION
$41.87
In Stock
Part Number: FIX11707466

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.4 / 5.0, 7 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Greg from Hillsboro, OR
Parts Used:
4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
Excessive noise during spin cycle
Be sure to read other instructions posted on this site, and watch the LG washer teardown videos on YouTube. DO NOT attempt to repair unless you have genuine LG (OEM) parts, such as those sold by this site. The most difficult step is removing the spider from the rear case; I had to use a 4lb sledge hammer to hit the spider shaft; use a str ip of softer metal, such as 1/8" aluminum, to protect the shaft. Once the spider is removed, the bearings can be tapped-out of the rear case. My spider was worn because the bearing seized and needed replacement. Also, the bolts connecting the spider to the drum were severely corroded, so the drum also needed replacement.
Read less
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Craig from Buckeye, AZ
Parts Used:
4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Noisy bearings
First, I ordered both bearings, shaft and tub seals but I got it apart and the back tub had bulges and cracks around the bearing pocket. I then ordered the back tub half and it came with the bearings, shaft seal and the 3 accordion hoses installed. I wish I would have ordered the tub half the first time around. I recommend NOT to bother w ith just the bearings and shaft seal. Craig.
Read less
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charlie from Diamondhead, MS
Parts Used:
4434ER0002H, 4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
loud noise during spin only
Disassembly time was about four hours, repair time about thirty minutes, and reassembly around two hours.I had really cramped quarters in which to work. I could either push the machine forward and work on the back or push it back and work on the front.I looked up bearing repair on You Tube then played it on a tablet one part at a time for disassembly. Once I got to the stator cover bolt, I removed it and the stator cover. I left the stator in place but was careful not to damage any of the coils. Taking the spider off was the biggest challenge. The video I was watching didn't mention that the screws had thread-lock on them and it felt like the threads would strip. After additional research, I used the penetrant and let it sit for about a half hour. Everything proceeded from there without incident. I followed the video recommendation to use dishwashing liquid to coat the bearings for installation. Reassembly was straightforward. There were two items that gave me the most trouble. The first was removal and installation the tub. Here it helps to have another set of hands. The second was installation of the tub seal clamp, but I didn't have locking pliers. In closing, one thing does not identify itself well on the illustrated parts drawings that are available--the large tub seal. I called LG tech support to verify it was correct before submitting my parts order.
Read less
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from West Hills, CA
Parts Used:
4280EN4001C, 4280EN4001D, 4036ER2004A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
The washing machine was making a real loud noise.
Changing your LG washing machines bearings

YouTube video made it easier. It was a different model but it still worked. First when you take your Machine apart put all the Screws and bolts back in the holes where you can, so you can find them later. This is a big job. If you're not mechanically inclined don't try it.
... Read more >Nevertheless, it was a lot easier than I thought. Use a camera/phone for pictures of the wiring. The hardest part of the job was getting the old bearings out. Do it like they show you on YouTube, Use a socket with an extension and a good mallet to the pound out the old bearings, the Gasket came out easy. Put your new bearings in place and gasket and your just about home free.

Reassembling the wash machine went fast. I don’t know what else to say I’m an older retired man with back problems and I did it. Just use common sense and you'll be fine. YouTube said it was a 5 hour job it took me about 10 hours, 8 hours taking it apart thanks to those darn stuck bearings. Less than two putting it back together.

The next time I'll do it in 5 hours or less. Lol

Hay what do you have to lose? It would cost more for a repairman or buying a new machine. Worst case scenario is make it easier to carry out the machine.

Oh by the way, I did this in 2 different sessions. Started before the bearings arrived and finished when they arrived.

Good luck
Read less
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Regulo from College Point, NY
Parts Used:
4986ER0001D, 4280EN4001C, 4280EN4001D, 4036ER2004A
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Bearings worng out
Removed drum out to open in two parts , ( plastic drum ) them nuckauot SS drum out . To removed damage bearings. Clean shaft , install new bearings and seal . Put back parts , connect all disconnected switches .run a test for no leackes . Machine run nice and smooth .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eduard from Indianapolis, IN
Parts Used:
4986ER0004F, 4280EN4001C, 4280EN4001D, 4036ER4001B, 4036ER2004A
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Washer vibrating during spin cycle
Replaced the tub bearings, seal and the 3 shocks. The most difficult part was the removal of the axle. I suggest you spray the axle with WD-40 and leave this at least 1 day. Clean the Tub and outer part with a high pressure spray (if available). Once completed the washer is performing as a brand new washer. The parts were delivered on-t ime and prices were reasonable. I highly recommend this supplier.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carlos from Findlay, OH
Parts Used:
4280EN4001C, 4280EN4001D, 4036ER2004A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
grinding noise
Watched how to do it yourself video online
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX7785070
Manufacturer Part Number: 4280EN4001D
Brand
Model Number
Description
LG
40311
Washer - Washer
LG
40318
Washer - Washer
LG
40441
Washer
LG
40518
Washer - Washer
LG
41028
Washer - Washer
LG
41029
Washer - Washer
LG
41172
Washer Dryer Combo - Washer-Dryer
LG
41182
Washer - Washer
LG
41372
Washer Dryer Combo - Washer-Dryer
LG
41373
Washer - LG Washing Machine Model 41373 Parts
Kenmore
79628862700
Washer - Kenmore Washing Machine Model 796.28862700 (79628862700, 796 28862700) Parts
Kenmore
79628869700
Washer - Kenmore Washing Machine Model 796.28869700 (79628869700, 796 28869700) Parts
Kenmore
79629872700
Washer - Kenmore Washing Machine Model 796.29872700 (79629872700, 796 29872700) Parts
Kenmore
79629877700
Washer - Kenmore Washing Machine Model 796.29877700 (79629877700, 796 29877700) Parts
Kenmore
79641172210
Washer - WASHER
Kenmore
79641172211
Washer - WASHER
Kenmore
79641182310
Washer - WASHER
Kenmore
79641182311
Washer - WASHER
Kenmore
79641282310
Washer - WASHER
Kenmore
79641282311
Washer - WASHER
Kenmore
79641372210
Washer - WASHER
Kenmore
79641372211
Washer - WASHER
Kenmore
79641373210
Washer - WASHER
Kenmore
79641373211
Washer - WASHER
Kenmore
79641379210
Washer - WASHER
Kenmore
79641379211
Washer - WASHER
LG
F12A1FDP
Washer
LG
F12A4FNP7
Washer - LG Washing Machine Model F12A4FNP7 Parts
LG
F1403FD9
Washer - LG Washing Machine Model F1403FD9 Parts
LG
F1403RD
Washer - LG Washing Machine Model F1403RD Parts