LG/LG_Thumb/173333-2.gif
See part F160 in the diagram
Replacing your LG Washer Water Inlet Valve - Cold play video
( Grid squares measure 1x1 inch )

Water Inlet Valve - Cold

$52.30
Fix Number: FIX11728995
Manufacturer #: 5220FR2075L
Manufactured by: LG

Product Description

If your washing machine is leaking, slow to fill, will not stop filling with water, or is not filling at all, the cold-water inlet valve may be defective. The purpose of the valve is to open to allow water into the washer, and is used for cold water, liquid bleach, and prewash cycles in your washing machine. This is a genuine OEM replacement part that measures approximately 4 inches long and 3 inches wide. It has a standard hose fitting inlet along with two outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left. When replacing this part, you will want to disconnect the power and water to your washer and remove the fill hoses. You will need to pull the machine out far enough so that you are able to access the back panel where the valves are located.

Videos For installing this part.

Replacing your Water Inlet Valve - Cold

Replacing your Water Inlet Valve - Cold play video
Questions and Answers

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.
    Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Jack
    September 27, 2021
    My LG washer 3 years old left fabric dispenser filled with water. Technician said we needed this part. We bought part and error codes fa and ie came on along with the area being flooded overnight. He tells me it was a defective part and not him that allowed the water to continuously run. Your thoughts would be appreciated.
    For model number WM3670HWA
    Hello Jack, Thank you for the question. If the water continues to fill even when the appliance is not in use, normally indicates the Valve is defective. The Valve can be tested as well. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Javier
    February 11, 2022
    I replaced this cold water inlet valve and I am afraid I might have mixed up the pre wash and main wash hoses. I know 100% that the hose marked 'bleach' goes in the right most port, but what are the order of the other 2? Is main wash suppose to be the center port on the inlet valve?
    Hi Javier, Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the water inlet valve. The washer in the video may appear different from yours, but it will give you a general idea on how to install the valve and the hoses. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
    play video

    Was this helpful?
    Thank you for voting!

      Installation Instructions Provided by Fix customers like you.

      Average Repair Rating: 4.8 / 5.0, 4 reviews.
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        • Customer:
          Frederick from Kennesaw, GA
        • Parts Used:
          5220FR2075L, 5220FR2006H
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Wrench (Adjustable)
        Washer was leaking at the bottom
        I actually looked on you tube for the type of washer and the issue. I checked all the areas the various videos showed me. The last one I checked was the inlet valves. All that is needed is a Phillips head and a wrench. Took the top off. Unplugged the washer. Unplugged the hoses. Unscrewed the valves and removed the hoses and the circuit pieces. Replaced one at a time. Everything worked perfect. Hooked hoses back up. No more leaks. Attached the top back and pushed back into place. No more leaking.
        5 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Cristina from Kingston, PA
        • Parts Used:
          5220FR2075L
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers
        The cold water inlet valve cracked and I kept getting water on the floor unless I shut off the water valve completely.
        Unplug the washer. Shut off the water and disconnect the cold water hose that goes in the back of the washer. Remove the top cover of the washer. Then I used pliers to disconnect the 3 black hoses from the old water valve that was cracked and to connect them back to the new water valve. It took less than 15 minutes. Very easy.
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          Chris from Freeland, MD
        • Parts Used:
          5220FR2075L
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers
        Washing machine was free flowing water
        Shut off the water to the machine and unplug it. Remove cold water line from the back of the machine. Remove the two screws holding the water valve in place. Using plyers, slide the clamps holding the three water lines in place out of the way so you can remove the lines. I installed the lines on the new valve as I removed them to avoid reinstalling them in the wrong place. Slide the water line clamps back in place, fasten the valve to the machine with the two screws you removed and reattach the cold water line.
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        • Customer:
          John from Surprise, AZ
        • Parts Used:
          5220FR2075L
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        Water Leak
        Unplug electric cord from washer. Removed 2 screws in the back of washer and slide top back 1 inch and lifted top off washer. Turned off cold water and disconnected the cold water line. Removed the 3 hoses connected to the valve assembly inlet and removed to 2 screws holding the valve assembly in place. Reassembled, total time was about 15 minutes. (very easy)
        0 of 1 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX11728995
          Manufacturer Part Number: 5220FR2075L
          Brand
          Model Number
          Description
          LG
          41072
          Washer - LG Washing Machine Model 41072 Parts
          LG
          41073
          Washer - LG Washing Machine Model 41073 Parts
          LG
          41162
          Washer - LG Washing Machine Model 41162 Parts
          LG
          41262
          Washer - LG Washing Machine Model 41262 Parts
          LG
          41302
          Washer - LG Washing Machine Model 41302 Parts
          LG
          41303
          Washer - LG Washing Machine Model 41303 Parts
          LG
          41382
          Washer - LG Washing Machine Model 41382 Parts
          LG
          41383
          Washer - LG Washing Machine Model 41383 Parts
          LG
          41392
          Washer - LG Washing Machine Model 41392 Parts
          LG
          41393
          Washer - LG Washing Machine Model 41393 Parts
          LG
          41962
          Washer - LG Washing Machine Model 41962 Parts
          LG
          41963
          Washer - LG Washing Machine Model 41963 Parts
          LG
          41982
          Washer - LG Washing Machine Model 41982 Parts
          LG
          41983
          Washer - LG Washing Machine Model 41983 Parts
          Kenmore
          79640021900
          Washer
          Kenmore
          79640311900
          Washer
          Kenmore
          79641162410
          Washer - WASHER
          Kenmore
          79641162411
          Washer - WASHER
          Kenmore
          79641172210
          Washer - WASHER
          Kenmore
          79641172211
          Washer - WASHER
          Kenmore
          79641182310
          Washer - WASHER
          Kenmore
          79641182311
          Washer - WASHER
          Kenmore
          79641262610
          Washer - WASHER
          Kenmore
          79641282310
          Washer - WASHER
          Kenmore
          79641282311
          Washer - WASHER
          Kenmore
          79641283310
          Washer - WASHER
          Kenmore
          79641302610
          Washer - WASHER
          Kenmore
          79641372210
          Washer - WASHER
          Kenmore
          79641372211
          Washer - WASHER
          Kenmore
          79641373210
          Washer - WASHER