Kenmore Washer Hose Clamp WP596669 | Fix.com

Hose Clamp

&SeePartX&
11743008-1-S-Whirlpool-WP596669-Hose Clamp
11743008-2-S-Whirlpool-WP596669-Hose Clamp
11743008-3-S-Whirlpool-WP596669-Hose Clamp
https://www.fix.com/Schematics/Maytag/IFMSPDID.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This washing machine hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This part fixes the following symptoms: Leaking, Will not stop filling with water.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Washer, Dishwasher, Refrigerator, Washer Dryer Combo, Freezer, Cabinet, Dehumidifier, Dryer, Ice Maker, Food Waste Disposer, Microwave, Air Conditioner.

Installation Videos

Replacing your Kenmore Washer Hose Clamp
Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Fixes the following symptoms:
  • Dishwasher is leaking water
Tools used for this repair:
  • 1/4 inch nut driver
  • Needle nose pliers
  • Putty knife

Installation Instructions

Showing 1-2 of 2 Instructions

Noticed water was leaking in front of washer-right before we were leaving for vacation

Upon returning from vacation, we needed to do laundry-so I put some plastic under the washer and we did a load. The water was leaking from the seam between the lid and the back panel on the side with the hot and cold water connections- not the front. I removed two screws from the front bottom panel and two screws from the underside of the lid.Turning the washer on showed the leak was coming from the injection valve( it was brittle from age). The rubber injection valve was replaced and installed( using a little liquid soap to help the rubber hose to slip over the rubber injection valve) with a new clamp. The leak was fixed.

Were these instructions helpful?

1 of 1 people found these instructions helpful
Parts Used: Rubber Injector Valve , Plastic Injector Nozzle , Hose Clamp
Difficulty Level: Easy
Total Repair Time: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Albert from Unadilla, NY

Old water inlet syphon broke plastic

I was see the Show on video installation and really very easy repair less than 10 mins!

Were these instructions helpful?

1 of 2 people found these instructions helpful
Parts Used: Hose Clamp , Water Inlet Syphon
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Timothy from Pittston, PA
Showing 1-2 of 2 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX11743008
Manufacturer Part Number: WP596669


Brand Model Number Description
Kenmore106625480Freezer
Kenmore106625481Freezer
Kenmore106625482Freezer
Kenmore106625490Freezer
Kenmore106625491Freezer
Kenmore106626480Freezer
Kenmore106626490Freezer
Kenmore106627481Freezer
Kenmore106627483Freezer
Kenmore106627484Freezer
Kenmore106627491Freezer
Kenmore106627493Freezer
Kenmore106627494Freezer
Kenmore106628480Freezer
Kenmore106628481Freezer
Kenmore106628490Freezer
Kenmore106628491Freezer
Kenmore106628530Freezer
Kenmore106628531Freezer
Kenmore106629480Freezer
Kenmore106629490Freezer
Kenmore106629590Freezer
Kenmore106635170Dehumidifier
Kenmore106635171Dehumidifier
Kenmore106638170Dehumidifier
Kenmore106638200Dehumidifier
Kenmore106639200Dehumidifier
Kenmore106639201Dehumidifier
Kenmore106639202Dehumidifier
Kenmore106639203Dehumidifier