Centerpost Gasket W10814296
Works With Model ATW4475VQ0!
$5.77
In Stock
- Fix Number:
- FIX11723081
- Manufacturer #:
- W10814296
- Manufactured by:
- Whirlpool
Works With Model ATW4475VQ0!
Jump to:
Product Description
Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.
-
Works with the following brands:Kenmore, Whirlpool, KitchenAid, Roper
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Leaking
-
Part# W10814296 replaces these:AP5983753, 21050, 383727, 62665, 96690, W10814296VP
- Works with the following brands:
- Kenmore, Whirlpool, KitchenAid, Roper
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Leaking
- Part# W10814296 replaces these:
- AP5983753, 21050, 383727, 62665, 96690, W10814296VP
Part Number Cross Reference
Videos For installing this part.
Replacing your Centerpost Gasket
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was leaking a little. A very small puddle formed underneath and to the left of the machine.
The installation video was sensational and invaluable. I watched it all the way through and then took it step by step as I repaired the machine. I ordered the water pump and the gasket at the same time, not knowing which part would solve the problem. The water pump was the easiest to replace so I replaced that, put the machine back tog
... Read more
ether--only to discover that the leak prevailed. I disassembled the machine again to replace the gasket. I cued up the video and follwed every step. I didn't have a spanner wrench so I had to wait for it to arrive. No hardware store or bib-box store carries this wrench. The hardest part of the whole job was removing that nut from the agitator. The spanner wrench fit perfectly but despite a lot of pounding combined with a lot of lubricant and dissolvant, it wouldn't budge. After 20 years, that nut was really on there. I went to an automotive store and asked for their best-performing lubricant. They recommended PB Blaster Penetrating Catalyst over any of the others, and wow, were they right! I lined the tub with paper towels for protection, sprayed a lot of PB Blaster on the nut, came back in 15 minutes and that nut came right off. It was unbelievable, and I was ecstatic. From there I relied on the video, took my time, cleaned the tub and everything else (which was filthy with tons of pet hair caked on!) put it all back together, hoped for the best, ran a load and was absolutely thrilled that there was no leaking! A really good project and a lot of money saved. I could never have done it and would not have attempted it without that superb installation video.
Read less
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- billy from Cypress, TX
- Parts Used:
- W10814296
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Socket set, Wrench set
water was leaking onto the floor when washer was filling
just like the video said step by step great video. Thank you
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator was wobbly
I simply followed the directions on the installation video on your site. Very simple!
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub was cracked, from moving
I went to you tube, on washer tub replacement . Did the repair according to video. Went very well, and simple
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Price from Waverly, TN
- Parts Used:
- WPW10096921, W10814296, 285871
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Water leak at tub seal.
ctions were excellent.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11723081
Manufacturer Part Number: W10814296
Manufacturer Part Number: W10814296
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.