271100-1-M-GE-WH1X2727-Tub Dampening Strap

( Grid squares measure 1x1 inch )

271100-1-S-GE-WH1X2727-Tub Dampening Strap

271100-2-S-GE-WH1X2727-Tub Dampening Strap

271100-1-S-GE-WH1X2727-Tub Dampening Strap 360 view

Tub Dampening Strap

Works With Model GTWP1800D0WW!

Rated by 8 customers

Really Easy

30 - 60 mins

Ratings submitted by customers like you who bought this part.

$9.61

Fix Number: FIX271100

Manufacturer #: WH1X2727

Manufactured by: GE

Works With Model GTWP1800D0WW!

Product Description

This is a single tub dampening strap for a washer. It is recommended to replace all 4 tub dampening straps at the same time, to ensure even wear. This part supports the tub and minimizes vibration by keeping it centered in the cabinet. If you notice loud banging or excessive vibration, this could be due to an off-balanced tub caused by a worn or damaged tub dampening strap. While inspecting this part, also check that the tub itself is not damaged where the straps mount. This manufacturer-approved replacement part is black in color and measures 5.875-inches by 0.625-inches.
Works with the following brands

General Electric, Hotpoint
Works with the following products
Washer
Fixes the following symptoms

Leaking, Will not agitate, Shaking and Moving, Burning smell
Part Number Cross Reference

Part# WH1X2727 replaces these:

AP2044899, 2289, WH1X2727, WH01X10028, WH01X10046, WH01X2727, WH1X10028, WH1X10046

1 Installation Video Questions and Answers

8 Installation Instructions Model Compatibility

Product Description Part Videos Questions and Answers Installation Instructions Model Compatibility

Product Description

This is a single tub dampening strap for a washer. It is recommended to replace all 4 tub dampening straps at the same time, to ensure even wear. This part supports the tub and minimizes vibration by keeping it centered in the cabinet. If you notice loud banging or excessive vibration, this could be due to an off-balanced tub caused by a worn or damaged tub dampening strap. While inspecting this part, also check that the tub itself is not damaged where the straps mount. This manufacturer-approved replacement part is black in color and measures 5.875-inches by 0.625-inches.

Works with the following brands:

General Electric, Hotpoint
Works with the following products:
Washer
Fixes the following symptoms:

Leaking, Will not agitate, Shaking and Moving, Burning smell
Part# WH1X2727 replaces these:

AP2044899, 2289, WH1X2727, WH01X10028, WH01X10046, WH01X2727 ... Show more , WH1X10028, WH1X10046 Show less

Videos For installing this part.

Replacing your Tub Dampening Strap

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 8 reviews.

< Prev
1
Next >

Sort by:

Customer:

Leslie from ROCKY FORD, CO
Parts Used:
WH1X2727
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

my washer would bang when it changed from wash to spin.

Step 1 unhooked the power. Step 2 unlatch the front panel. Step 3 remove the three screws holding the control panel in place. Move the panel to the right and fold it back over the back of the washer out of the way. Step 4 remove the two screws in front holding the top in place. raise the top slightly and unlatch the switch and slide it out of the top. Remove the top and set aside. Step 5 remove the screws holding both ends of the straps and replace the straps with the new ones. To get the back ones the tub has to be moved over to gain access. It is easier to install the rear straps first, that way the tub will move more. Reassemble in reverse order paying attention to the position of the latches for the front panel so they line up with the slots and latch correctly. After assembly is complete check the tub for level.

9 of 9 people found this instruction helpful.