Part Location Diagram of WH1X2727 GE Tub Dampening Strap
See part 370 in the diagram
Replacing your General Electric Washer Tub Dampening Strap
( Grid squares measure 1x1 inch )

Tub Dampening Strap WH1X2727

Works With Model 56041A0WW!

Rated by 8 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$9.60
In Stock
Fix Number:
FIX271100
Manufacturer #:
WH1X2727
Manufactured by:
GE
Works With Model 56041A0WW!

Product Description

This is a single tub dampening strap for a washer. It is recommended to replace all 4 tub dampening straps at the same time, to ensure even wear. This part supports the tub and minimizes vibration by keeping it centered in the cabinet. If you notice loud banging or excessive vibration, this could be due to an off-balanced tub caused by a worn or damaged tub dampening strap. While inspecting this part, also check that the tub itself is not damaged where the straps mount. This manufacturer-approved replacement part is black in color and measures 5.875-inches by 0.625-inches.

Videos For installing this part.

Replacing your Tub Dampening Strap

Replacing your Tub Dampening Strap

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 8 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Leslie from ROCKY FORD, CO
Parts Used:
WH1X2727
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
my washer would bang when it changed from wash to spin.
Step 1 unhooked the power. Step 2 unlatch the front panel. Step 3 remove the three screws holding the control panel in place. Move the panel to the right and fold it back over the back of the washer out of the way. Step 4 remove the two screws in front holding the top in place. raise the top slightly and unlatch the switch and slide it ou t of the top. Remove the top and set aside. Step 5 remove the screws holding both ends of the straps and replace the straps with the new ones. To get the back ones the tub has to be moved over to gain access. It is easier to install the rear straps first, that way the tub will move more. Reassemble in reverse order paying attention to the position of the latches for the front panel so they line up with the slots and latch correctly. After assembly is complete check the tub for level.
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dean from Parker, CO
Parts Used:
WH02X10383, WH02X10265, WH49X10042, WH2X1197, WH1X2727
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Washer leaking and noisy
Follow the videos. They explain how to do this repair extremely well. Don't forget that the nut that holds the basket is a left-hand thread. I used a pipe wrench and a hammer to break it loose. I used a screwdriver to stab the old seal and pry it out without damaging the tub. It came out pretty easily. I used hand soap to lubricate the new seal and fit it in after cleaning out the tub's seal seat. It's a relatively easy job and now it doesn't leak and the noise is greatly reduced. I also lubricated the bearings with Lithium grease but that required taking the entire machine apart which is also explained in another video......
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jose from cleveland, OH
Parts Used:
WH1X2727
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
broken tub dampening straps
Took the front panel of the machine off and located the straps. Removed them with the nutdriver. Install all four in under 30 minutes. The best thing was the video your company provided. It made it easy to fix the problem and for that i'm thankful.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pat from Dandridge, TN
Parts Used:
WH1X2727
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
tub shaking realy bad
took front off top off and put the bands in and back together less than 30 min
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tom from Caledonia, WI
Parts Used:
WH41X22935, WH1X2727
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
3 of the 4 dampening straps were broken,inlet hose cracked.
Remove front cover.Remove 2 screws holding top section and lift it up and back.Change straps and hose that are easy to access.Reinstall top and front panels.(Make sure water is turned off and electric is unplugged).For me was an easy fix.Also the parts supplied were the exact fit.Thanks .
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
clifford from new london, NC
Parts Used:
WH1X2727
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Tub dampening straps broke
the video does not show it but the led lock did not unplug / i had to pop it out at the holder
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Apache Junction, AZ
Parts Used:
WH1X2727
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Tub dampening strap broken
Went by the instructions and replaced all 4 straps.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Sacramento, CA
Parts Used:
WH1X2727
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Two out of four Tub Dampening Straps were broken
On this model you use a screw driver to pop the front of the dryer off. Then you remove a screw from the L bracket on each side that holds the top down. Prop the top up so you have easier access to the back screws that hold the rear dampening straps in place. Remove and replace one strap at a time. The only hard part is getting your hand back in to the screws. Otherwise this is an easy process.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX271100
Manufacturer Part Number: WH1X2727
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52120TAWB
Washer
General Electric
56031A0WW
Washer
General Electric
56041A0WW
Washer
General Electric
56051A0WW
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56200T2WB
Washer
General Electric
56200T3WB
Washer
General Electric
56200T5WB
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
General Electric
56241B0WW
Washer