Selector Knob with Clip

Removed old knob andreplaced with new

Unlpug dryer remove cover with allen wrench twist switch to remove move leads (spade clips) to new switch and snap into place.Replace cover and plug in dryer -- Repair complete very easy!!

easy, just took off broken old dial and inserted new one, video instructions were included with part.,

Watched install video - snapped it on - problem fixed.

Replaced the Drum Bearing Slides. One had come out of position and was not bearing the load properly. Remove the two screws that secure the top in place. Remove the top. Remove the two screws holding the front in place. I place a small towel underneath each screw next to the drum to catch the screw in case I drop them. When you have the f ... Read more ront of the dryer leaning away from the drum, replace the glides. Vacuum the lint build up in the fan area before assembling the dryer.

Followed the instruction. Took off the old knob and clip. Snapped on new knob. Works great

I followed the video. The parts of the video where they do steps in the process but is not shown are the toughest. For instance, pre-threading the part with new nuts without a power tool was horrible. Attaching to the drum was not easy for one person to do. They skimmed over this.