V-Style Drive Belt WH1X2026
Works With Model 56121T2WW!
$14.09
In Stock
- Fix Number:
- FIX270803
- Manufacturer #:
- WH1X2026
- Manufactured by:
- GE
Works With Model 56121T2WW!
Jump to:
Product Description
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Washer
-
Fixes the following symptoms:Will not agitate, Burning smell, Spins slowly, Will not drain
-
Part# WH1X2026 replaces these:AP2044592, 3481, WH01X1249, WH01X2026, WH1X1249, WH1X2026- ... Show more , WH1X2026., WH1X2026R Show less
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Washer
- Fixes the following symptoms
- Will not agitate, Burning smell, Spins slowly, Will not drain
- Part# WH1X2026 replaces these:
- AP2044592, 3481, WH01X1249, WH01X2026, WH1X1249, WH1X2026-, WH1X2026., WH1X2026R
Part Number Cross Reference
Videos For installing this part.
Replacing your V-Style Drive Belt

Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
October 11, 2021
Does the part fit top loading stackable washer and does it have the pulley tool? I also need dryer door handle as clips that hold in place broke off
For model number GTUN275EM1WW serie:AD0084782

Hello Carol, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX1766009 for the Belt. We are not showing a Pulley Tool required when replacing the Belt. We suggest watching the How to Video on replacing the Belt. The Door Handle is only sold as part of the Door its self, Fix Number: FIX3499683. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Cynthia
February 8, 2022
Is this the only belt on washer
For model number GTWP2000M0WW

Hello Cynthia, Thank you for contacting us. We have researched the model you have provided and have found the only belt required for this model is the Fix Number: FIX270803. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would agitate but not spin
I figured it was the clutch since the washer would agitate so it wasn't the switch. New clutch and belt was delivered by parts elect in 4 days. Amazing! If you're doing this job always replace the belt even if the old one looks good. The four screws holding the motor were not very tight so maybe that's why the clutch broke. I remove
... Read more
d those nuts and then the belt. Had to puzzle the motor out. First tilt back then out. I don't see how you could remove the clutch without taking out the motor assembly. I trashed the retaining clip removing it but the new clutch came with one so no worries. I used a crowbar to gently pursade the clutch off the spindle. Cleaned up the slightly rusted spindle with some 600 grit paper. Gave it a little waterproof grease and slid the clutch on then the retaining clip. Puzzled the motor back in and used the crowbar for a little leverage to tighten the belt then tightened those four screws. I will check those screws in a few weeks. Pretty easy. Although the wife wanted a new front loader, this cheap fix should last many years. One fault in this washer is that water splashes a bit inside while agitating. No way to stop that so it is doomed to rust internally eventually. I was very impressed with parts elect website in diagnosing the problem.
Read less
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alan from Tamarac, FL
- Parts Used:
- WH1X2026
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set, Wrench set
Washer would not spin with heavy load
I first investigated the problem on the website. Indications were it was possibly the V-Belt. I watched the video to see how hard it would be to change the belt. The video was excellent and very instructive. I purchased the belt and it arrived very quickly. I followed the video instructions and replaced the belt with a little difficulty.
... Read more
The belt was A-OK but unfortunately the machine was still DOA with heavy loads. Even though my problem did not work out, I would highly recommend your website for the Saturday mechanics. (Bought another GE washer)
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ben from VALLEJO, CA
- Parts Used:
- WH1X2026
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
noisy washer
everything you need to know is to watch the installation video.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Taylors, SC
- Parts Used:
- WH1X2026
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
I started to smell Burning Rubber
I unplugged the machine then popped off the front panel with a putty knife. I used a 3/8 wrench to loosen 4 bolts under the motor then slid the motor back and removed the old belt. Put on the new belt slid the motor forward with tension and tighten the 2 back bolts then tighten the 2 front bolts. Check tension then replaced front panel pl
... Read more
ugged up the machine and now good as new.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joseph from pitcairn, PA
- Parts Used:
- WH1X2026
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
bad belt
replace belt
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Retaining clip for the clutch broke and drive belt was worn.
Remove the front panel and found the retaining clip for the clutch was broke and the belt was worn. Loose the four bolts from the motor, push the motor back and took off the belt out. install the retaining clip for the clutch put the belt and push the motor back to the front and tight the four bolts and that was all folks, easy. Thank you
... Read more
for your service.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX270803
Manufacturer Part Number: WH1X2026
Manufacturer Part Number: WH1X2026
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.