Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Knob and Clip
$17.94
Special Order
- Fix Number:
- FIX268451
- Manufacturer #:
- WH01X10061
- Manufactured by:
- GE
- Product Description
- This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The main reason you would need to replace the timer knob, is if the teeth on the inside of it are worn, and will not allow you to adjust the timer. This part is sold separately from the timer dial. To complete this repair, you will need a pair of needle nose pliers to disconnect the old retaining clip.
- Works with the following brands:
- General Electric, Hotpoint
- Works with the following products
- Washer
- Fixes the following symptoms
- Will Not Start
- Part# WH01X10061 replaces these:
- AP2044505, 277249, WH1X10061
Part Number Cross Reference
Product Description
This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The main reason you would need to replace the timer knob, is if the teeth on the inside of it are worn, and will not allow you to adjust the timer. This part is sold separately from the timer dial. To complete this repair, you will need a pair of needle nose pliers to disconnect the old retaining clip.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Washer
-
Fixes the following symptoms:Will Not Start
-
Part# WH01X10061 replaces these:AP2044505, 277249, WH1X10061
Videos For installing this part.
Replacing your Knob and Clip
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- David from Tulalip, WA
- Parts Used:
- WH13X10024, WH12X10076, WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
Washer overfilled on some cycles. Wouldn't spin on some cycles.
I watched the videos. Wasn't sure if I needed dual water inlet valve or water level pressure switch, so I installed both. They solved the problem. Great web site and useful videos.The knob was installed as well with the help of the video.
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- charles from richfield, OH
- Parts Used:
- WH49X10042, WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
no agitation
pop off the agitator unscrewed the plastic holder .snapped the new holder on tightened the holder reinstalled the agitator works find.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel from Phoenix, AZ
- Parts Used:
- WH11X10033, WH1X2117, WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
timer dial not positioned. Know cogs kworn
Removed holding clip. Pulled knob off. Removed dial. reversed procedure to repair. Very easy
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darrel from Casey Creek, KY
- Parts Used:
- WH01X10061
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Timer wouldn't advance
I watched the video? ordered parts it took a lot less time to install them than it's took to write this! Thank you!
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from adrian, MI
- Parts Used:
- WH49X10042, WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set
knob selector was broke and would not agitate
pulled off agitator ,this was the hardest part. removed airbell installed new airbell , agitator slid on like butter. put new knob on slid clip on and pushed it on with small screwdriver works like new
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Myrna from Marietta, OH
- Parts Used:
- WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The underside of my washers on/off and cycle knob had worn out and needed replaced.
I pulled the retaining clip off the back of the knob and it released the knob and slid new part on and inserted new retaining ring and that is all it needed!
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Hamlin, NY
- Parts Used:
- WH01X10061
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Could not adjust the washer control
Pulled clip out of old knob, put on new know and replaced clip. Two minutes aprox.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Waukesha, WI
- Parts Used:
- WH01X10061
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The Knob was no longer turning the dial to the different cycles
As seen on the video, simply get a needle nose pliers and look behind the dial for the retainer clip - carefully remove that and the dial is free from the post. Pull out your new dial and reatiner clip - remove the clip to where it is almost off the dial. Carefully slip the new dial over the post and push your retainer clip back to the
... Read more
resting position and your new dial should be locked on the machine.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lorraine from EAST STROUDSBURG, PA
- Parts Used:
- WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
knob was stripped
pulled off knob and just replaced it. Easy!
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bessie from Pikeville, NC
- Parts Used:
- WH01X10061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Plastic Threads Worn Off Control Knob
Broke the old control knob to get to the clip holding it in place and removed old knob . Placed the new know on the threads and placed the new clip to hold the knob in place and walla, the dial now turns to select the wash cycle. Caution: be sure the dial is pushed in and the plastic teeth not slipping against the base where the knob
... Read more
seats into the control module. Or you will need to replace this part ever 2-3 years from wear.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Georgiana G - May 23, 2021
Verified Purchase
satisfied
The knob and clip on my 20 something year old washer broke. It was easy and simple to get a replacement.
Model Compatibility
This part works with the following models:
Fix Number: FIX268451
Manufacturer Part Number: WH01X10061
Manufacturer Part Number: WH01X10061
Brand
Model Number
Description
✖
Mail-In Recycling Rebate