2354082-1-M-GE-WH38X10017-Shaft and Mode Shifter Assembly
Part Location Diagram of WH38X10017 GE Shaft and Mode Shifter Assembly
See part 320 in the diagram
2354082-1-S-GE-WH38X10017-Shaft and Mode Shifter Assembly 360 view
( Grid squares measure 1x1 inch )
2354082-1-S-GE-WH38X10017-Shaft and Mode Shifter Assembly 2354082-2-S-GE-WH38X10017-Shaft and Mode Shifter Assembly 2354082-1-S-GE-WH38X10017-Shaft and Mode Shifter Assembly 360 view
Part Location Diagram of WH38X10017 GE Shaft and Mode Shifter Assembly

Shaft and Mode Shifter Assembly

Rated by 3 customers 

?

Easy 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

?
$283.17
In Stock
Fix Number:
FIX2354082
Manufacturer #:
WH38X10017
Manufactured by:
GE
Product Description
Also known as the gearcase or transmission. This part helps move the agitator back and forth during the wash cycle. New shifter mounting holes are NOT threaded, use original self tapping screws to install new part. Tub seal is included with assembly.
Works with the following brands:
General Electric, Hotpoint
Works with the following products
Washer
Fixes the following symptoms
Will not agitate
Part Number Cross Reference
Part# WH38X10017 replaces these:
AP4380186, 1475792, WH38X10017, WH38X10015
6 Related Parts Questions and Answers 3 Installation Instructions Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

Also known as the gearcase or transmission. This part helps move the agitator back and forth during the wash cycle. New shifter mounting holes are NOT threaded, use original self tapping screws to install new part. Tub seal is included with assembly.

  • Works with the following brands:
    General Electric, Hotpoint
  • Works with the following products:
    Washer
  • Fixes the following symptoms:
    Will not agitate
  • Part# WH38X10017 replaces these:
    AP4380186, 1475792, WH38X10017, WH38X10015

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Hub Nut
$21.97
In Stock
Part Number: FIX271505
This part is the hub nut, or lock down nut for your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is appro...
Tub Bearing Washer
$9.97
In Stock
Part Number: FIX271509
Tub Bearing
$27.53
In Stock
Part Number: FIX271510
The tub bearing secures the spin basket in the tub assembly of a washer. It is located on the bottom of the outer tub. A common symptom of a worn tub bearing is a very loud noise (including a grinding sound) during the s...
6-Rib Drive Belt
★★★★★
★★★★★
(2)
$25.75
In Stock
Part Number: FIX1482278
This is a 6-rib washer drive belt. It is sourced directly from the original manufacturer and constructed with a durable Poly V material. This part connects the drive motor to the drive system that turns the basket. This ...
Split Ring
$14.41
In Stock
Part Number: FIX1766022
This split ring is two inches in diameter.
Tub Seal
$16.73
In Stock
Part Number: FIX4704237
If your washer is leaking when it is filling or agitating, you may need to replace the tub seal. The tub seal is found between the transmission and the outer tub in your washing machine. This genuine OEM part serves as t...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.4 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Stephen from Bridgewater, NJ
Parts Used:
WH02X10383, WH38X10017, WH02X10265, WE03X29897, WH01X10302, WH2X1199, WH2X1198, WH2X1197, WE25M40
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
noisy
New shaft, belt and housing. Installation was going fine until went to install belt and IT was way to short .THANKS
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Duane from Indianapolis, IN
Parts Used:
WH38X10017
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Socket set, Wrench set
Washer Spin Cycle was making a noise - bearing suspected
Initially replaced the tub bearing, but that wasn't the problem. The problem was the bearing in the shaft and mode shifter assembly, but you cannot replace the bearing in this assembly without complex tools an knowledge of the device assembly. So I had to replace the entire assembly. Only real difficult was removing the hub nut. Reall y need a hub nut wrench to get it off. First tear down and re-assembly for the hub bearing took 5 hours, (while watching Steves video on a table). Second tear down and re-assembly took 2.5 hours. Additionally I added some rubber to the agitator drive interface to lessen the banging that it causes when changing direction.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MH from Katy, TX
Parts Used:
WH38X10017, WH49X10042, WH02X10237
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Water Leeking from the core of the shaft & Mode Shifter Assembly
Viewed & closely followed the 4 videos for replacing the Tub Bearing, replacing Tub Seal, replacing Agitator Coupler, and replacing the Drive Belt. Viewed a further video on replacing the Shaft & Mode Shifter Assembly by other. Replaced all subject parts in the 5 videos except the drive belt. The details of dis-assembly were followed wi th a strict organization of dismantled parts and screws. Paid attention to Steve comments on Tub Nut. The Tub Nut tightness can sap your will. You may take a break or two & return to it. I sprayed the tub nut with Lime Away repeatedly followed by anti rust agent. In addition the outer bottom of the inner tub needed to be similarly de-limed by repeated spraying with Lime Away. Finally, a 1 11/16 Spanner Wrench was a must tool.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX2354082
Manufacturer Part Number: WH38X10017
Brand
Model Number
Description
General Electric
57431DCWW
General Electric
57731H6WW
Washer
General Electric
57751H0WW
Washer
General Electric
57751H1WW
General Electric
57751H2WW
General Electric
57751H3WW
Washer
General Electric
58971K0WW
General Electric
58971K2WW
Washer
General Electric
58971K3WW
Washer
General Electric
EJRR4170E6WW
General Electric
EWA4500DCWW
General Electric
EWA5600G0WW
Washer
General Electric
EWA5600G1WW
Washer
General Electric
EWA5600G2WW
Washer
General Electric
EWA5600G3WW
Washer
General Electric
EWA5600K0WW
Washer
General Electric
EWA5600K1WW
Washer
General Electric
EWA5600K2WW
Washer
General Electric
EWA5600K3WW
Washer
General Electric
EWA6500DCWW
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GCAP1000M2WW
Washer
General Electric
GCSR2090H6WW
Washer