Part Location Diagram of WH01X10310 GE Timer Knob
See part 8 in the diagram
Replacing your General Electric Washer Timer Knob
( Grid squares measure 1x1 inch )

Timer Knob

Works With Model GTWN2800D1WW!

Rated by 20 customers 

?

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$8.69
In Stock
Fix Number:
FIX1482286
Manufacturer #:
WH01X10310
Manufactured by:
GE
Works With Model GTWN2800D1WW!

Product Description

This is a genuine OEM replacement timer knob for your washing machine that is white in color. Replacing this part is a simple repair that only requires a pair of needle nose pliers. We suggest disconnecting the power so that you do not accidentally start the washer when replacing the knob. Use the pliers to remove the retaining clip on the old knob, and then remove the part from the shaft. The new knob will have the retaining clip already attached. Simply line up the knob opening with the shaft and push it into place.

Videos For installing this part.

Replacing your Timer Knob

Replacing your Timer Knob

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.9 / 5.0, 20 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Bernard from CHARLOTTE, NC
Parts Used:
WH01X10310
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Cycle select knob teeth were stripped.
Used needle nose plier to remove "U" shaped plastic retainer, (same function as a cotter pin), from broken knob.

Removed defective knob.

Replaced with new knob.

Used needle nose plier to insert "U" shaped plastic retainer.

Washer restored to original condition.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Worthington, OH
Parts Used:
WH01X10310
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Cycle selector would not turn with timer knob
Disconnect power, pull timer knob out to the full extension. Behind the knob is a plastic keeper key. With needle nose pliers, pull up to release the knob. On the new knob, the keeper key is already in place. Press the knob onto the shaft and the job is done.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from LAS VEGAS, NV
Parts Used:
WH01X10310, WH1X2117
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Timer knob base teeth were gone and couldn’t engage the selector.
Removed clip holding knob on and replaced both. Only difficulty was trying to see the clip to remove it. Ended up bending the clip. Replacement was easy.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from CLIFTON, NJ
Parts Used:
WH11X10049, WH01X10310, WH1X2117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Knob replacement
Unplugged washer. Using needle nose pliers removed old knobs and installed new ones. Your how to video was helpful.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ETHEL from GREENSBORO, GA
Parts Used:
WH01X10310
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The washer cycle control knob would just spin around. It wouldn't make the selector move.
Let me first say how pleased I am with this company! Not only did I get the part I ordered, but it came a few days sooner than expected! This is how I fixed it...I just used needle nose pliers to grab hold of the clip that is behind the old knob and pulled the clip off. Once you get that clip off, the old knob will pull right off. Then I took the knob that I ordered ( which already has a clip on it) and simply pushed it on. It took less than 15 minutes to fix and I am a 62 years old grandma!It cost just over $10.00 for the part and shipping. I first googled the problem, and then I found this video on how to replace the knob: Thank you for helping this grandma save over $125.00 for a repair job.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from St Louis, MO
Parts Used:
WH01X10310
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Knob teeth were worn smooth
Took the pin behind knob off with needle nosed pliers, knob slipped off. Pushed new knob on.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from Tuscola, IL
Parts Used:
WH11X10049, WH01X10310
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Push-pull knob on timer will not turn timer
After finding like model on line used pictures of parts on partselect.com to confirm parts needed and then ordered. On arrival in two days, removed old timer knob using pliers to remove clip, removed dial (with compression ring). Installed new dial and pushed on new timer knob (DON'T remove clip and try to install later) with clip in pl ace. Clip will fall into place when installed. It took longer to find out which model family the washer was than anything.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Maureen from Nash, TX
Parts Used:
WH01X10310
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Timer knob not working.
I followed the instructions on your website which were super easy. Took about 4 minutes to get old one off and new one on. It's been broken over a year and we were manually making timer work. I assumed it would cost s lot and the part was under 6.00 to fix plus shipping. Thank you so much
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JACKIE from LAS VEGAS, NV
Parts Used:
WH11X10049, WH01X10310
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
THE COMPRESSION RING BROKE
I DID EXACTLY WHAT I WAS INSTRUCTED TO DO ON THE SITE "YOU TUBE" VIDEO. WOW--IT WAS TOO EASY--THANKS
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Trisha from Alma, NE
Parts Used:
WH11X10049, WH01X10310, WH02X10093, WH1X2721, WH1X2117
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Knob Stripped Out - Broke
Watched install video - snapped it on - problem fixed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX1482286
Manufacturer Part Number: WH01X10310
Brand
Model Number
Description
General Electric
57731H0WW
Washer
General Electric
57731H2WW
Washer
General Electric
57731H3WW
Washer
General Electric
57731H5WW
Washer
General Electric
57731H6WW
Washer
General Electric
57731H7WW
Washer
General Electric
57731H8WW
Washer
General Electric
57731H9WW
Washer
General Electric
GBAN2800F0WW
Washer - WASHER
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GCAP1000M0WW
Washer
General Electric
GCAP1000M1WW
Washer
General Electric
GCAP1000M2WW
Washer
General Electric
GCAP1800D0WW
Washer
General Electric
GCAP1800D1WW
Washer
General Electric
GCSR2090H0WW
Washer
General Electric
GCSR2090H2WW
Washer
General Electric
GCSR2090H3WW
Washer
General Electric
GCSR2090H5WW
Washer
General Electric
GCSR2090H6WW
Washer
General Electric
GCSR2090H7WW
Washer
General Electric
GCSR2090H8WW
Washer
General Electric
GCSR2090H9WW
Washer