Pump to Tub Inlet Drain Hose
$15.71
In Stock
Fix Number: FIX11721808
Manufacturer #: WH41X22935
Manufactured by:
GE
-
Product Description
This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.
-
Works with the following brandsGeneral Electric, Hotpoint
-
Works with the following productsWasher
-
Fixes the following symptomsLeaking
-
Part Number Cross ReferencePart# WH41X22935 replaces these:AP5983873, WH41X0371, WH41X10163, WH41X371
Product Description
This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.
-
Works with the following brands:General Electric, Hotpoint
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking
-
Part# WH41X22935 replaces these:AP5983873, WH41X0371, WH41X10163, WH41X371
Videos For installing this part.
Replacing your Pump to Tub Inlet Drain Hose
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Tom from Caledonia, WI
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
3 of the 4 dampening straps were broken,inlet hose cracked.
Remove front cover.Remove 2 screws holding top section and lift it up and back.Change straps and hose that are easy to access.Reinstall top and front panels.(Make sure water is turned off and electric is unplugged).For me was an easy fix.Also the parts supplied were the exact fit.Thanks .
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Carrie from Lees Summit, MO
-
Parts Used:WH41X22935
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set
Hose was puntured and leaking
I removed the punctured hose and replaced it with the new one. The pinch clamps were a little tricky to get around the hose end and the weird angle, but not too hard once I figured out a system. Then had to put the bottom back on and return to ints location. It took longer to unhook it from all the hoses, remove and replace the bottom and rehook to the hoses then the actual repair took!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Jeff from Morton, IL
-
Parts Used:WH41X22935
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Water leak
Replaced the drain hose just as described in the video.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11721808
Manufacturer Part Number: WH41X22935
Manufacturer Part Number: WH41X22935
Brand
Model Number
Description