Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
January 19, 2022
I have an Electrolux washer and I’m trying to replace the door seal. I already bought one and my washer is leaking. Is this the correct model seal to fit my washer? Any help would be appreciated.
For model number EFLS627UIW
Hello Johnny, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX12731388. We suggest checking to make sure it is installed properly and the Bellow Spring and Clamp are properly seated and are not damaged. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
It’s not hard to remove the bellows but reinstalling is a nightmare. The spring has to be spread so far it is virtually impossible to get on. Installation videos show securing it with clamps, good luck with that. I got it halfway on and it just sprung off allowing my hand to shoot upward into the washer top bracket which by the way is quite sharp on the bottom. Sharp to the extent that it slit the lower knuckle on my right thumb to the bone and now I sit here with a swollen hand and seven stitches. I doubt they will publish this but if they do my recommendation is don’t even try and by the way I am experienced over many years and have never had a problem installing anything except this.