Door Hinge with Bushings
Works With Model ATF8000FS1!
$105.89
Special Order
Fix Number: FIX1152380
Manufacturer #: 134550800
Manufactured by:
Frigidaire
Works With Model ATF8000FS1!
-
Product Description
This part attaches to the outside of the front door panel to help with the door open and closing properly.
-
Works with the following brandsFrigidaire, Crosley, Electrolux, Kenmore
-
Works with the following productsWasher
-
Fixes the following symptomsLid or door won’t close, Leaking, Will Not Start
-
Part Number Cross ReferencePart# 134550800 replaces these:AP3886714, 1191162
Product Description
This part attaches to the outside of the front door panel to help with the door open and closing properly.
-
Works with the following brands:Frigidaire, Crosley, Electrolux, Kenmore
-
Works with the following products:Washer
-
Fixes the following symptoms:Lid or door won’t close, Leaking, Will Not Start
-
Part# 134550800 replaces these:AP3886714, 1191162
Videos For installing this part.
Replacing your Door Hinge with Bushings

Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Arthur from New Castle, DE
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Door would not close/latch.
Removed door from washer. With door on flat surface all the screws are easily removed to replace striker & door hinge/ bushings. Pay attention to bushings position when removing so as to replace them in the same position. Video shows a guy pulling the door gasket off to replace the door lock & switch assembly. Skip that & remove the top cover from the washer. Only two screws in the back hold it on & it's a lot easier to reach inside & pull the switch up than fighting with the door gasket. With the new door hinge, door closes easier & more solid than when brand new. Easy fix.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Leo from ARKANSAS CITY, KS
-
Parts Used:134550800
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Door hinge broke.
Step 1, put the door inside facing up.
Step 2, remove Phillips head screws.
Step 3, remove cover, check for broken pieces of hinge.
Step 4, replace hinge, there is only one way to place it.
Step 5, screw the cover back on.
Step 6, mount it back onto the washer.
Step 2, remove Phillips head screws.
Step 3, remove cover, check for broken pieces of hinge.
Step 4, replace hinge, there is only one way to place it.
Step 5, screw the cover back on.
Step 6, mount it back onto the washer.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1152380
Manufacturer Part Number: 134550800
Manufacturer Part Number: 134550800
Brand
Model Number
Description