Watch the install video

1146950-1-M-Frigidaire-134511600 -Drive V-Belt

( Grid squares measure 1x1 inch )

1146950-1-S-Frigidaire-134511600 -Drive V-Belt

1146950-2-S-Frigidaire-134511600 -Drive V-Belt

1146950-1-S-Frigidaire-134511600 -Drive V-Belt 360 view

Part Location Diagram of 134511600 Frigidaire Drive V-Belt

Replacing your Frigidaire Washer Drive V-Belt

Drive V-Belt 134511600

Works With Model FEX831FS0!

★★★★★

★★★★★

Rated by 14 customers

Easy

30 - 60 mins

Ratings submitted by customers like you who bought this part.

$10.83

Fix Number:: FIX1146950
Manufacturer #:: 134511600
Manufactured by:: Frigidaire

Works With Model FEX831FS0!

Jump to:

Product Description
Part Videos
Questions and Answers
Related Parts
Installation Instructions
Customer Reviews
Model Compatibility

Product Description

If your washer drum is not spinning, there may be an issue with your drive belt. The drive belt wraps around the motor pulley and helps the basket to spin. Other signs there are issues with the belt is if there is a burning rubber smell, or the washer is noisy while spinning. The belt is subjected to wear and tear, and over time it may wear out. This is a genuine OEM part that is made of rubber.

Works with the following brands:

Frigidaire, Kenmore, Gibson, Westinghouse
Works with the following products:
Washer, Washer Dryer Combo
Fixes the following symptoms:

Burning smell, Will not agitate, Spins slowly, Will not drain
Part# 134511600 replaces these:

AP3867042, 1156860, 134511600, 131234000, 131686100, 134161100 ... Show more , 3204418, F145371, F145371-000 Show less

Works with the following brands:: Frigidaire, Kenmore, Gibson, Westinghouse
Works with the following products: Washer, Washer Dryer Combo
Fixes the following symptoms: Burning smell, Will not agitate, Spins slowly, Will not drain
Part# 134511600 replaces these:: AP3867042, 1156860, 134511600, 131234000, 131686100, 134161100, 3204418, F145371, F145371-000

Videos For installing this part.

Replacing your Drive V-Belt

Replacing your Drive V-Belt

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Jared

March 29, 2022

how does this belt get installed

Hello Jared, we have attached a video. We hope this helps.

8 people found this helpful.

Was this helpful?

Related Parts Additional or alternate parts to consider.

View More

Tension Idler Pulley

$22.00

Affresh Washing Machine Cleaner - 3 pack

$12.58

Produce Preserver Filter

$21.50

Affresh Dishwasher Cleaner Tablets - 6

$19.09

Cooktop Cleaning Cream

$15.57

Cooktop Cleaner

$17.74

Affresh Cleaner

$19.09

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 14 reviews.

< Prev
1
2
Next >

Sort by:

Customer:: michael from Cave City, KY
Parts Used:: 137292700, 134511600, 5303937139, 5303283286, 131825900
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

browning clothes .zipper on jackets were tore off

after watching video and reading the review, whole job was simple

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: William from DELAWARE, OH
Parts Used:: 134511600, 5303261031, 5303161306, 3204425, 3161433
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

The drive belt squealed and smelled like burning rubber

I first removed the old Idler Pulley by prying the washer off from the shaft. I thought at first they just put a washer on the shaft to hold it together but the old c-clip fell off after it rusted away. I found it in a small pile of rust on the base of the machine with a small magnet. I then got the new parts arranged for assembly. I remo ... Read more ved the largest spring at the base of the drum near the motor with a pair of vise grips. There is very little clearance from shaft and the base of the machine so you need all the space you can get to put the new parts on. Be sure to put the spring back on in the same slot which was the second slot for my machine. Leave the top part of the spring in its slot and let it hang down. Take the new Idler pulley, insert the plastic spacer in between the new spring and install it inside the Idler Pulley onto the shaft. Put the tension spring on first and then the Pivot Shaft Washer. Install the c-clip and be careful since it is very small and could be lost easily. Keep a small magnet nearby just in case to pick it from the base of the washer since it may be hard to see if it gets away from you. Be sure to get the Tension Spring in the right hole that kind of looks like a triangle. There are six of them and you want to put the end of the spring in the third hole from the front looking in from the front of the machine. You can see them all by looking on the top right hand side of the motor. Just shine a flashlight there and you can see them. You then need to push the end of the spring into that hole (third one). If your machine originally had it in a different hole for instance like hole number two, put it in there. It could vary a little from machine to machine. Always use a new belt, a new Idler Pulley and Idler Pulley spring, a new Pivot Shaft Washer and new C-clip. Be sure to pad your arms or put some padding down since it will scrape your arms and or bruise them. It is in an uncomfortable position. Once that is on, install the new drive belt. Run the belt in from the right side under the biggest pulley, pull it to your left, wrap it around the motor's pulley, the Idler pulley and start it in the track of the largest pulley. While holding the belt in place, rotate the largest pulley with your right hand while pushing on the Idler pulley if necessary. As you rotate the largest pulley to the right the belt will go back into the track of the largest pulley and the belt will slip on. The last step is to put the BIG spring hanging down in front of you, on the drum, back into the second slot located on the base of the machine with vise grips. Now all you have to do is put the rest of the machine back together and check its operation. In the beginning if it smells just a little like burning rubber that should not be a problem. The belt is new and some of it will wear off while the water drains and the spin cycle begins. After a few loads of laundry the smell will go away. I have used my washer for many loads now and it works very well!

Read less

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: mike from Shelton, WA
Parts Used:: 134511600
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Water leak

Fixed water leak and order new belt for good measure .

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Tin from Glen burnie, MD
Parts Used:: 137221600, 134511600
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Easy no problem

Just copy the video attach with parts order

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: victoria from Sherrills Ford, NC
Parts Used:: 134511600
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

The washer suddenly made loud noises and did not spin all the water out.

My husband first attempted to access the belt by removing the back and top of the machine. This clearly was getting him nowhere near the belt...so we watched a u-tube video which showed that all one had to do was remove the front and replace the belt which is way down at the bottom. It worked like a charm-once he knew what to do.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: PATSY from MANCHESTER, OH
Parts Used:: 134511600
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

TUB NOT SPINNING; BURNING RUBBER SMELL

REMOVED FRONT OF WASHER; REMOVED OLD BELT AND PUT NEW ONE ON

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: DENNIS from BARTON, VT
Parts Used:: 134511600
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Washing machine would not spin

Took off the front panel. Removed the worn out belt and replaced it with the new one. Replaced the front panel......All Done and working !!!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: moshe from maryland heights, MO
Parts Used:: 134511600
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Washer shaking moving during cycle spin

According to yours recommendation of the symptom shaking and moving when spin,
I replace the belt and a replace snubber ring the leg is OK the washer is in level but its steel shaking and moving when spin

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: James from Brentwood, NY
Parts Used:: 134511600
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

V belt broke

Put new one on

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Darlene from Cable, OH
Parts Used:: 134511600
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

The drive belt on the maytag washer broke. Part select had the part.

After watching the you tube video the repair was fixed in 15 mins. We are up and running the washer like it was new.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

< Prev
1
2
Next >

★ Customer Reviews

Average Rating: (2 Reviews)

4.0

★★★★★

★★★★★

Filter By Rating:

5★

1
4★

0
3★

1
2★

0
1★

0

< Prev
1
Next >

Sort by:

★★★★★

★★★★★

Verified Purchase

Part fits

The part fits but shipping took twice as long as promised.

★★★★★

★★★★★

Verified Purchase

Works great!

Though it took a little longer than I'd like to arrive I was warned shipping could be delayed so I knew what to expect it was the exact belt I obviously ordered and works perfect washer is good as new. Great job!

Model Compatibility

This part works with the following models:

Fix Number: FIX1146950
Manufacturer Part Number: 134511600

Kenmore

41789980100

Washer Dryer Combo

Kenmore

41789980800

Washer Dryer Combo

Kenmore

41790802990

Washer Dryer Combo

Kenmore

41790802991

Washer Dryer Combo

Kenmore

41790802992

Washer Dryer Combo

Kenmore

41790807990

Washer Dryer Combo

Kenmore

41790812990

Washer Dryer Combo

Kenmore

41790812991

Washer Dryer Combo

Kenmore

41790812992

Washer Dryer Combo

Kenmore

41790814000

Washer Dryer Combo

Kenmore

41790814001

Washer Dryer Combo

Kenmore

41790814002

Washer Dryer Combo

Kenmore

41790817990

Washer Dryer Combo

Kenmore

41790862990

Washer Dryer Combo

Kenmore

41790862991

Washer Dryer Combo

Kenmore

41790862992

Washer Dryer Combo

Kenmore

41790872990

Washer Dryer Combo

Kenmore

41790872991

Washer Dryer Combo

Kenmore

41790872992

Washer Dryer Combo

Kenmore

41791702000

Washer Dryer Combo

Kenmore

41791702001

Washer Dryer Combo

Kenmore

41792702200

Washer Dryer Combo

Kenmore

41793702200

Washer Dryer Combo

Kenmore

41793702201

Washer Dryer Combo

Kenmore

41793802200

Washer Dryer Combo

Kenmore

41793802201

Washer Dryer Combo

Kenmore

41793812200

Washer Dryer Combo

Kenmore

41793812201

Washer Dryer Combo

Kenmore

41793814200

Washer Dryer Combo

Kenmore

41793814201

Washer Dryer Combo