Jump to:
Product Description
This part comes with the sensor/thermistor.
-
Works with the following brands:Frigidaire, Kenmore, Crosley, Electrolux
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# 134371220 replaces these:AP3844429, 1154728, 134371220, 134371210
- Works with the following brands:
- Frigidaire, Kenmore, Crosley, Electrolux
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# 134371220 replaces these:
- AP3844429, 1154728, 134371220, 134371210
Part Number Cross Reference
Videos For installing this part.
Replacing your Water Inlet and Dispenser Valve
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- rudy from Mercedes, TX
- Parts Used:
- 134371220
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Standing water inside the washers tumbler
An easy repair, this is a blue plastic part that has three solenoids (color coded) when the solenoids wear out, standing water overflow occurs and spills onto your floors. When you get your new part, remove the rear oval cover from the washer so that you can see what your doing, shut the water, disconnect the waterlines and pull the elect
... Read more
rical plug. More important pry the top cover upwards from the back, enough to fit your hands, the top cover is held by 2 screws on the back, once you do that you will see the blue plastic part you will be replacing. (you'll need plenty of light) The part is held by 2 Phillips head screws, the one on the right is a little harder to get to. Wiggle the part off and replace with new part. My part didn't come with 2 new black rubber grommets so I used my old ones. The grommets are the most critical parts at this point. if you forget to install em you will have a leak and will have to start over. It took me less than 20 minutes to do this install and I saved about 2 hundred in labor.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Mooresville, NC
- Parts Used:
- 134371220
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Left washer on my porch over night during my recent move. It froze and cracked the plastic. Causing a massive leak.
I could easily tell the part was cracked and leaking. I removed the part took the vin # and ordered the part from your website. I guess I should consider myself lucky, since installing the new part was easy. Seems like a fairly simple machine after tinkering around a little bit. Thanks again for the speedy service.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
William G - April 3, 2021
Verified Purchase
Cold water wasn't going into the washer
Delivery on the date as accepted & works great!
Model Compatibility
This part works with the following models:
Fix Number: FIX1145692
Manufacturer Part Number: 134371220
Manufacturer Part Number: 134371220
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.