See part 5 in the diagram
( Grid squares measure 1x1 inch )
Range Bake Element
Works With Model CWE5800ACB!
$65.19
In Stock
Fix Number: FIX11757472
Manufacturer #: WPY04000066
Manufactured by:
Whirlpool
Works With Model CWE5800ACB!
-
Product Description
This bake element with push on wire terminals is located in ranges and ovens. The terminal depth is 3 inches, the total element length is 19 and the wire terminals are 16 inches wide. Detailed installation instructions are found in the manual provided by the manufacturer. If your element is not heating then replacing it can solve your problem.
-
Works with the following brandsMagic Chef, Maytag, Hardwick, Admiral
-
Works with the following productsWall Oven, Range, Microwave Oven Combo
-
Fixes the following symptomsLittle to no heat when baking, Element will not heat, Oven not heating evenly, Oven is too hot
-
Part Number Cross ReferencePart# WPY04000066 replaces these:AP6024122, 04000047, 04000066, 0E00105199, 1938318, 1938325, 1938370, 551119, 74004073, 7406P013-60, 7406P075-60, 7406P424-60, 790208, W10310269, Y04000047, Y04000066, Y0E00105199
Product Description
This bake element with push on wire terminals is located in ranges and ovens. The terminal depth is 3 inches, the total element length is 19 and the wire terminals are 16 inches wide. Detailed installation instructions are found in the manual provided by the manufacturer. If your element is not heating then replacing it can solve your problem.
-
Works with the following brands:Magic Chef, Maytag, Hardwick, Admiral
-
Works with the following products:Wall Oven, Range, Microwave Oven Combo
-
Fixes the following symptoms:Little to no heat when baking, Element will not heat, Oven not heating evenly, Oven is too hot
-
Part# WPY04000066 replaces these:AP6024122, 04000047, 04000066, 0E00105199, 1938318, 1938325 ... Show more , 1938370, 551119, 74004073, 7406P013-60, 7406P075-60, 7406P424-60, 790208, W10310269, Y04000047, Y04000066, Y0E00105199 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:GLENN from CHINO HILLS, CA
-
Parts Used:WPY04000066
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Bake element broke in half.
Disconnect electric.
Remove 2 screws.
Pull out old unit.
Disconnect wire connect tabs.
Install new unit.
Connect wire tabs.
Replace 2 screws
Remove 2 screws.
Pull out old unit.
Disconnect wire connect tabs.
Install new unit.
Connect wire tabs.
Replace 2 screws
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Katie from Kingston, IL
-
Parts Used:WPY04000066
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
Bake element broke.
I took two Philips head screws out. Pulled the element out. I disconnected two wires on either side of the element. I took the old element out of the oven and put the new element into the oven and reattached the two wires to the element and I pushed it all the way back in and re-attached the element to the oven with the two Philips head screws and it was done!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Craig from Waymart, PA
-
Parts Used:WPY04000066
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
No heat on bake, element open, no resistance on ohms test.
Turn off oven circuit breaker. Remove 2 phillips head screws holding element base from back of oven. Push element up in front, gently work out of hole in back careful not to damage or disconnect spade connectors. Once clear from hole, remove connectors from old element and connect new element. Place element base back in hole, fasten screws, turn on circuit breaker and turn oven to bake on high till element is red to test.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Jon from Sparta, MI
-
Parts Used:WPY04000066
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Over element burned out
Easy, all it took was a Philips screwdriver.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Steven R. from Tarzana, CA
-
Parts Used:WPY04000066
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Heating element turned into arc welder! Burned and disintegrated
Cut power. Unscrewed element backing plate from back of oven. Pulled out element and disconnected wires. Reconnected wires. Pushed assembly back in. Screwed down backing plate. Done!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Frank from Fort Worth, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Oven wont heat up.
Replaced bottem element & long oven sensor. The oven still wont heat.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Robert D. from Lake Placid, FL
-
Parts Used:WPY04000066
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Burnt out element
Used a number two Phillips screwdriver to remove the two attaching screws, and removed the element far enough to detach the two electrical quick-disconnect fittings, which allows replacement of the element. Quick, and simple...
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Betty from Pasadena, TX
-
Parts Used:WPY04000066
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Element broke in half
I turned the oven breaker off from the breaker box, just to be safe. Unscrewed two screws pulled element out of insulation Used pliers to unplug from wires put new element in pushed plug connectors back in and gently pushed on with pliers pushed back in insulation screwed new screws on threw breaker back on. DONE! Super easy. About 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Terry from Donaldsonville, LA
-
Parts Used:WPY04000066
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
Burnt element
Easy. I really like the 1" grid that showed the size and dimensions. I compared it to the one I had and ordered it. I have ordered over the internet before only to get the wrong size and it was difficult to return and reissue. This was a breeze. Thank you so much!TB
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Steven from Central, SC
-
Parts Used:WPY04000066
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
bake element had ceased to work and deformation had occurred.
This Magic Chef wall oven is a 20+ years old original appliance in my double-wide mobile home. The only literature I have for it does not have the model number nor serial number recorded, and I could find them nowhere on the oven itself. The only help I gathered from the paperwork was how to remove/replace the oven door, making access to the element"s mounting screws and wiring easier. MAKE ABSOLUTELY SURE YOU HAVE TURNED OFF THE CIRCUIT BREAKER TO THE OVEN BEFORE BEGINNING WORK! I removed the two screws from the mounting plate and pulled the two wires off the spade terminals. Then I took a few measurements of the element and browsed the site until I found one with the same dimensions and connections. This site is great as they show many parts laid against a 1-inch grid for reference. The short wait for the part to arrive was the perfect time for my wife to clean the oven (she came up with that idea on her own). Installation is basically the reverse of the removal. Piece of cake! (Now we can bake one)
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Michael Von K - June 19, 2021
Verified Purchase
Replaced
Very easy to replace, works like new.
Vickie B - December 26, 2019
Verified Purchase
Wonderful
Finally got my oven fixed, it's wonderful to have it back and working. Thank you so much it works great now.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11757472
Manufacturer Part Number: WPY04000066
Manufacturer Part Number: WPY04000066
Brand
Model Number
Description
Maytag
77B-4CXWM5P
Range
- Maytag Range/Stove/Oven Model 77B-4CXWM5P (77B4CXWM5P, 77B 4CXWM5P) Parts
Magic Chef
77F-5EXWW
Range
- Magic Chef Range/Stove/Oven Model 77F-5EXWW (77F5EXWW, 77F 5EXWW) Parts
Maytag
79F-5EXW
Range
- Maytag Range/Stove/Oven Model 79F-5EXW/15X (79F5EXW/15X, 79F 5EXW/15X) Parts