Temperature Sensor
Works With Model GMC305PDS08!
$87.78
In Stock
Fix Number: FIX11748765
Manufacturer #: WPW10131825
Manufactured by:
Whirlpool
Works With Model GMC305PDS08!
-
Product Description
This temperature sensor detects the temperature within the oven cavity.
-
Works with the following brandsKitchenAid, Whirlpool, Jenn-Air, Maytag
-
Works with the following productsWall Oven, Range, Microwave Oven Combo, Cooktop
-
Fixes the following symptomsOven is too hot, Little to no heat when baking, Oven not heating evenly, Will Not Start
-
Part Number Cross ReferencePart# WPW10131825 replaces these:AP6015486, 4455636, W10131825, WPW10131825VP
Product Description
This temperature sensor detects the temperature within the oven cavity.
-
Works with the following brands:KitchenAid, Whirlpool, Jenn-Air, Maytag
-
Works with the following products:Wall Oven, Range, Microwave Oven Combo, Cooktop
-
Fixes the following symptoms:Oven is too hot, Little to no heat when baking, Oven not heating evenly, Will Not Start
-
Part# WPW10131825 replaces these:AP6015486, 4455636, W10131825, WPW10131825VP
Videos For installing this part.
Replacing your Temperature Sensor

Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
December 3, 2021
My oven is not heating properly. I have checked every element for continuity and they all read less than 1 ohm. So I am checking my temperature sensor from the back of the panel and it has a small plug on it. My multi-meter's probes are too big to get into the plug. Do you have any suggestions on how to check the resistance on the temperature sensor?
For model number KERA807PSS02

Hello Mike, Thank you for the question. The only way to test the resistance is with the Multimeter. If the probes are too large, a different meter would be needed. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Alison from Beaverton, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
The range doesn't maintain constant heat and doesn't know the accurate temperature
Followed the excellent instructions, but it didn't work :(I think the control panel is bad.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:James from Cedar Grove, TN
-
Parts Used:WPW10131825
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Temp was off by 15 degrees
I removed the 2 screws that held the sensor in and pulled it forward and unplugged the connector. I plugged in the new sensor and replaced the 2 screws that had been remove. It was done in about 5 minutes or less.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:marcus from Monroeville, AL
-
Parts Used:WPW10131825
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
oven was getting too hot
Turned power off and unplugged from outlet. Opened door and took Philip screwdriver and removed two screws. Very slowly pulled sensor out and unplugged connector.connected new sensor and installed it back to oven. Plugged back in outlet and turned power back on.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11748765
Manufacturer Part Number: WPW10131825
Manufacturer Part Number: WPW10131825
Brand
Model Number
Description