This part is made from durable plastic material and is sold individually. Please note, the hardware to secure this debris shield is sold separately.
Works with the following brands:
Works with the following products:
Trimmer, Brush Cutter
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
July 14, 2023
I just received the debris shield and it’s different than the old one and does not attach to the shaft of my weed eater. Please advise. I do appreciate how fast it was delivered but it doesn’t attach. Thanks!
For model number Shindaiwa T230
Hello James, thank you for reaching out. According to our research, the debris shield compatible with your model is part number FIX10043465. It may have been updated by the manufacturer. We have found some relevant instructions for you to replace the shield. You may follow the following steps: insert the debris shield between the outer tube and the debris shield mounting plate. Fit the two shims and the bracket over the outer tube and loosely install the four socket-head cap screws. Tighten the four socket-head cap screws to secure the debris shield. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
This part works with the following models:
Fix Number: FIX10043465
Manufacturer Part Number: C550000391