Fuel Line and Filter
This fuel line filters the fuel in the tank as it pushes into the carburetor by the primer bulb. If your carburetor is not getting fuel, ports get clogged, or the fuel line is leaking, then replacing this part will solve these problems. It is important to replace it as soon as damage is noticed because clogging can result in your engine not starting. For this repair, you will need the following tools: torx/Phillips drivers, long screwdriver, long-nosed pliers, long screwdriver, cutters or scissors, and two-cycle engine oil. For this repair, first remove the retainer ring from the fuel line and insert it through gas cap opening. Next, thread the fuel line through the hole in the bottom of the fuel tank and pull the line through to firmly place it against the tank wall. For the last steps, put the retainer ring on the fuel line and press the ring firmly against the external side of the fuel tank wall. Lastly, attach it to correct line on the carburetor.
Videos For installing this part.
Replacing your Fuel Line and Filter
Questions and Answers
Be the first to ask our experts a question about this part!
Related PartsAdditional or alternate parts to consider.
Manufacturer Part Number: 791-682039