Part Location Diagram of 882699 Whirlpool Drive Gear Kit
See part 6 in the diagram
( Grid squares measure 1x1 inch )

Drive Gear Kit 882699

Works With Model TU8100XTP0!

Rated by 9 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$58.57
In Stock
Fix Number:
FIX398589
Manufacturer #:
882699
Manufactured by:
Whirlpool
Works With Model TU8100XTP0!

Product Description

This is a genuine OEM drive gear kit for your trash compactor. It includes the drive gear, pin spring, a retaining clip which is also known as a c-ring, ram stop, and the ram cam. The ram is used to compact the trash and if it is getting stuck, making excess noise, or is not stopping at the end of the cycle, then the drive gear may need to be replaced. Before beginning this repair, please be sure to disconnect the power supply to the trash compactor.

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 9 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
John from RUTHERFORD, NJ
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Trash compactor ram was not working.
Watched the video and followed the directions step by step.
14 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from MAMMOTH LAKES, CA
Parts Used:
882699
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
The Kenmore Trash Compactor RAM device was stuck in the down position due to the plastic drive gear breaking into pieces
First I went on YouTube and looked at about 4 different repair videos, but they were for Whirlpool units, not Kenmore.
Unplugged unit and removed it from counter space.
Removed bottom panel to access the drive gear.
Rotated chain counterclockwise to raise the RAM. Then I could remove the trash drawer.
Removed the top p anel and then removed the RAM from the compactor.
Inspected the 2 side power nuts and they were OK. (This was the other replaceable part to order)
Replaced the large drive gear. Lubricated it with grease.
Didn't replace the small drive gear because I couldn't remove the drift pin going through the gear and the motor shaft.
Re-assembled the panels and plugged it back in and tested it before replacing it in the counter.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joshua from BLOOMFLD HLS, MI
Parts Used:
882699
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
The compactor abruptly stopped with the ram in the down position.
Step 1. Removed the top panel.
Step 2. Laid compactor on its side and removed the bottom panel. The large drive gear was broken into 3 pieces.
Step 3. Raised the ram manually by turning one of the chain drive gears with a wrench. This took almost a half hour and, while not physically difficult, was tedious.
Step 4 . Ordered parts. This was not as simple as one might have thought, since I could not locate a model number anywhere on the unit. The picture for the presumptive replacement shows only the large gear. It does not reveal that there is a chain gear attached on the bottom of the drive gear. I was wary of ordering an incorrect part, especially since the part was original to Whirlpool and my compactor was a Maytag.
Step 5. When the parts arrived, I attempted to remove the old chain drive gear but could not because the tension of the chain was too great to permit the gear's removal from the shaft on which it was mounted. I had to detach one of the remaining two chain drive gears to gain enough slack on the chain to remove the old gear. Note: The entire assembly was full of thick grease that got over everything. I would suggest using latex or vinyl gloves during the repair. I would also recommend a heavy duty soap/detergent for cleaning up afterward.
Step 6. After removal of the old chain drive gear. the new gear assembly slipped right on.
Step 7. I reattached the chain and the loosened gear without difficulty and then replaced the panels.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leigh from LA VETA, CO
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Plastic gear broke
Step 1 unscrewed bottom panel .
Step 2 removed broken gear.
Step 3 loosened set screws.
Step 4 Installed New gear.
Step 5 tightened set screws.
Step 6 reinstalled bottom panel.
Step 7 smiled as I started it up.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Silas from Owensboro, KY
Parts Used:
882699
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
very old compactor stripped plastic gears.
First was going to replace but found new one is about $700! Gear set came with everything, right down to roll pin and hints on final adjustment. Getting the compactor out of the cabinet and turned over was about the hardest part. Installation went easy with everything fitting perfectly and I saved $700!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Southwest Ranches, FL
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
compactor stuck but motor runs fine
Unplug first lay on side unscrew bottom five screws 2 on bottom and 3 on back side at bottom.pull cover off and found plastic gear broken..pulled clip and slid off old part slid new gear on and put clip back on applied grease installed bottom cover and screws ..really simple and works perfectly
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
michael from Escanaba, MI
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Broken gear wheel
Replaced
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Howard from Sedona, AZ
Parts Used:
882699
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Broken gear
No problem
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Watertown, NY
Parts Used:
882699
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set, Wrench (Adjustable)
Compacter not working, door jammed.
The specifics of the repair (replacement of broken main gear) are well covered above. There were only two points of difficulty. The first was fixing things enough to be able to open the door to get the model number to order the parts! A useful reminder to me to make _sure_ that all model numbers of all appliances are recorded and acces sible! The second difficulty - and not so much of one once I figured it out - was trying to get the thing plugged back in! It's a built in, and our contractor must have used a micrometer to measure for the opening. No chance of plugging it in as it came out of the cabinetry. It took me a while to realize that the strain relief fitting holding the cord at the top rear of the unit was an opening clip
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX398589
Manufacturer Part Number: 882699
Brand
Model Number
Description
Kenmore
19025
Trash Compactor - Kenmore Trash Compactor Model 19025 (1988) (19025(1988)) Parts
Whirlpool
45FF
Freezer - FREEZER
Whirlpool
4EAF
Freezer - FREEZER
KitchenAid
4KUCC150S0
Trash Compactor
KitchenAid
4KUCC150S1
Trash Compactor
KitchenAid
4KUCC150S2
Trash Compactor
KitchenAid
4KUCC151T0
Trash Compactor
KitchenAid
4KUCC151T1
Trash Compactor
KitchenAid
4KUCC151T4
Trash Compactor
Kenmore
6221338550
Trash Compactor
Kenmore
6221358550
Trash Compactor
Kenmore
6221388550
Trash Compactor
Kenmore
6228369301NZ
Trash Compactor
Kenmore
6228415001NO
Trash Compactor
Kenmore
6228416001GO
Trash Compactor
Kenmore
62284169900
Trash Compactor
Kenmore
6228419001GO
Trash Compactor
Kenmore
62284199910
Trash Compactor
Kenmore
62284199920
Trash Compactor
Kenmore
6651330590
Trash Compactor
Kenmore
6651336580
Trash Compactor
Kenmore
6651336581
Trash Compactor
Kenmore
6651336582
Trash Compactor
Kenmore
6651338550
Trash Compactor
Kenmore
6651338580
Trash Compactor
Kenmore
6651338581
Trash Compactor
Kenmore
6651338582
Trash Compactor
Kenmore
6651339580
Trash Compactor
Kenmore
6651339581
Trash Compactor
Kenmore
6651340590
Trash Compactor