Genuine manufacturer approved replacement magnetic switch that is specially made for Jet saws. It is the part of the tool handling on/off operations. Over time switch components may wear out eventually requiring replacement. This high quality switch has a plastic body and it is sold individually.
Works with the following brands:
Jet
Works with the following products:
Table Saw
Works with the following brands:
Jet
Works with the following products
Table Saw
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karl
April 8, 2022
We need front reunion number JTAS10DX-152. Please email us back or call us or text us on my phone thanks
For model number 708676. Ser#14040404. JtaS10L-152
Hello Karl, Thank you for writing. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
David
April 7, 2023
replacement magnetic switch for a JET table saw, model# JTAS-10XL-1, stock#708661, serial#9058568. I having trouble finding any reference to compatible switches 230V 18A HP3.
For model number JTAS-10XL-1
Hello David, thank you for your question. The correct one is Magnetic Switch 230V 3PH, and the part number is FIX10390617. We look forward to hearing from you.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
On /off switch was sticking and had to punch it several times
Ordered a new switch from you and installed it but nothing works. Called Jet and waiting to hear back. May have to take it to a dealer but am very frustrated as I am working on a large project and was hoping to complete it this week. Any suggestions will help.
Thank You Dave W.
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(1 Review)
1.0
★★★★★
★★★★★
Filter By Rating:
5★
0
4★
0
3★
0
2★
0
1★
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joe M - May 24, 2019
Verified Purchase
Defective, seconds, or cheap knockoff.
When I first bought it I thought it was decent, not as good as the original, but not bad. Now I think it's just junk. The only real issue at first seemed to be that the buttons needed pushed a lot farther than normal to get it to work.
A magnetic switch should shut off when the power goes out. This one didn't. Last week the power went out while I was resawing. When it came back on the saw started back up on its own. It failed to do the one job it was designed for.
Today I finished a cut and turned the saw off. It started right back up. I had to turn it off twice. I thought maybe that was a fluke, but it did it again 5 minutes later. How dangerous is that? You turn off a saw, reach for your board and the saw starts right back up. Now my saw is out of commission until I can find a new magnetic switch.
Model Compatibility
This part works with the following models:
Fix Number: FIX10390616
Manufacturer Part Number: JTAS10-23
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.