Table Saw Timing/Drive Belt 34-674
$58.63
In Stock
- Fix Number:
- FIX10321742
- Manufacturer #:
- 34-674
- Manufactured by:
- Delta
Jump to:
Product Description
-
Works with the following brands:Delta
-
Works with the following products:Table Saw, Saw
- Works with the following brands:
- Delta
- Works with the following products
- Table Saw, Saw
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken belt (motor runs, blade didn't turn)
1) Watched YouTube video before ordering parts to confirm my problem and to get an overview of the repair.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have ... Read more one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.
Cleaning and testing took as long as changing the belt and inspecting brushes.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have ... Read more one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.
Cleaning and testing took as long as changing the belt and inspecting brushes.
Read less
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX10321742
Manufacturer Part Number: 34-674
Manufacturer Part Number: 34-674
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.