( Grid squares measure 1x1 inch )

Leg Catch

Rated by 1 customers

Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$6.59

Fix Number:: FIX9927406
Manufacturer #:: 242416-00
Manufactured by:: DeWALT

Product Description: This is a single OEM leg catch for workbenches. This part holds the leg on the workbench in the down position and locks it into the correct position. When it is released, the leg can raise back into the up position. If the legs of your workbench are wobbly or will not lock in place properly, a damaged leg catch is the likely culprit.
Works with the following brands:: Black and Decker
Works with the following products: Sawhorse

Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This is a single OEM leg catch for workbenches. This part holds the leg on the workbench in the down position and locks it into the correct position. When it is released, the leg can raise back into the up position. If the legs of your workbench are wobbly or will not lock in place properly, a damaged leg catch is the likely culprit.

Works with the following brands:

Black and Decker
Works with the following products:
Sawhorse

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Philip

July 13, 2022

Is the leg catch easy to replace

For model number Workmate 200

Hello Phillip, thank you for your question. To remove the old leg catch, remove the pin securing it, position the new leg catch on the work bench and reinstall the pin to secure it. We hope this helps. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

3 people found this helpful.

Was this helpful?

Related Parts Additional or alternate parts to consider.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews.

< Prev
1
Next >

Sort by:

Customer:: Roger from LIVONIA, MI
Parts Used:: 242416-00
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins

Replace broken leg catch

Punched out rod holding broken catch. Took it to bench grinder to taper ends when putting it back together after placing new leg catch on it. Tapering made it much easier on reinstall.

1 person found this instruction helpful.

Was this instruction helpful to you?

< Prev
1
Next >

Model Compatibility

This part works with the following models:

Fix Number: FIX9927406
Manufacturer Part Number: 242416-00

Black and Decker

79-032

Sawhorse - Workmate 200 Work Center

Black and Decker

79-033-BDK

Sawhorse - Workmate 300 Work Center

Black and Decker

79-041

Workbench - Workmate 400

Black and Decker

MM003

Sawhorse - Workmate

Black and Decker

WM225

Sawhorse - Workmate

Black and Decker

WM400

Sawhorse - Workbench

Black and Decker

WM425

Sawhorse - Workmate